i have a rn105 lux and it has a 253 in it, does anyone know what engine mounts to use??? mine are shagged,
also it has no accelerator cable, last one broke, i have a hilux one but its right on the pedal end but where it meets the holley its wrong...any thoughts???
any help would be fantastic
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
hilux 253 engine mounts & accel cable
Moderators: toaddog, TWISTY, V8Patrol, Moderators
hilux 253 engine mounts & accel cable
RN105 dual cab 253 v8
Re: hilux 253 engine mounts & accel cable
I know this is a fairly old post, but I might still be helpful?
I have an LN46 Hilux with 253, 350 Holley on adapter plate to stock 2 barrel stromberg manifold.
Mine has what looks like an original throttle cable, but the end with the stock knob has been cut off, and there is a fitting about 2 inches long with a ball on the end as you would find on a generic GM/Ford throttle cable. This end is held onto the original cable with a small grub screw.
I have no idea where this part came from, but may be able to try a speed shop or something.
Also not sure if it would work, but I was thinking of using a standard 3/5L or 1HZ throttle linkage that bolts onto the side of the intake manifold which has the cable lug attatched on one end and an actuator rod onto the injecotr pump on the other, I'm guessing the ball on the diesel injector pump would be similar size to the ones found on Holleys.
I have an LN46 Hilux with 253, 350 Holley on adapter plate to stock 2 barrel stromberg manifold.
Mine has what looks like an original throttle cable, but the end with the stock knob has been cut off, and there is a fitting about 2 inches long with a ball on the end as you would find on a generic GM/Ford throttle cable. This end is held onto the original cable with a small grub screw.
I have no idea where this part came from, but may be able to try a speed shop or something.
Also not sure if it would work, but I was thinking of using a standard 3/5L or 1HZ throttle linkage that bolts onto the side of the intake manifold which has the cable lug attatched on one end and an actuator rod onto the injecotr pump on the other, I'm guessing the ball on the diesel injector pump would be similar size to the ones found on Holleys.
The old Luxy was fun, but with a young family comes great responsibility.
So I swapped it for a 60. Should be able to take the whole mob camping, plus I got an extra gear, 2 less cylinders and A/C.
So I swapped it for a 60. Should be able to take the whole mob camping, plus I got an extra gear, 2 less cylinders and A/C.
Re: hilux 253 engine mounts & accel cable
hey, i just had a simalar problem, but you can just go into your local autobarn and get an aftermarket cable, it's just a standard cable with fitting a screw to lock it in place, should fit all cars,
" You can't fix it if you don't break it "
Who is online
Users browsing this forum: No registered users and 10 guests