Just wondering if anyone is running these springs just want to know how much I will need to move the mounts and also what the best size shackles to run are front and back also when installing crossover steering on a ln65 do I need to install a power steering pump from a Ida model as well as the box or just the steering box
Cheers
Kane
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Locktup springs and crossover
Moderators: toaddog, Elmo, DUDELUX
Re: Locktup springs and crossover
install instructions can be found on the locktup and or trail-gear website. for highsteer u use the IFS powersteering box only, powersteering pump will be the same or useable.
Re: Locktup springs and crossover
Is that the case even when I don't have power steering it is a 85 single cab with no power steering
Re: Locktup springs and crossover
If you dont have power steer and you want to fit high steer you will need to fit power steer...Toyota didnt make a left to right non powersteer box ...kane86 wrote:Is that the case even when I don't have power steering it is a 85 single cab with no power steering
Hell Raiser 4 seat social buggy..
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Re: Locktup springs and crossover
So virtually my best best is to fit power steering first and then get the high steer fitted or would it be easier just doing the whole lot in one hit
Re: Locktup springs and crossover
If you dont have power steer and your wanting to go to high steer just fit it all at once cause you need to fit an indepenant power steer box and they are mounted differently to a standard box...kane86 wrote:So virtually my best best is to fit power steering first and then get the high steer fitted or would it be easier just doing the whole lot in one hit
indepenant box will not work with your current steering system either...
Hell Raiser 4 seat social buggy..
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Re: Locktup springs and crossover
Ok thank you very much for your help now it's time to track down a power steering set up does it have to be from a ln65 or will a ln106 etc system work fine
Re: Locktup springs and crossover
If the same engine is fitted to both yes will be fine.. if not the pump will be fin you might have to modifiy the mounts... welcome to the world of modifications... it will never stop now...kane86 wrote:Ok thank you very much for your help now it's time to track down a power steering set up does it have to be from a ln65 or will a ln106 etc system work fine
Hell Raiser 4 seat social buggy..
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Re: Locktup springs and crossover
Yours would have a L or 2L diesel? in which case powersteering from a 3L or 2LTE will suit
Who is online
Users browsing this forum: No registered users and 2 guests