Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Wiring spotlights into 80 series
Moderator: -Scott-
Wiring spotlights into 80 series
Ok so I have got a wiring loom with a switch, problem is the high beams are negative switched so power is always on to both terminals when car lights are on. Now my guess would be to wire the -ve on the switch to the terminal that switches off and the positive to the one that is always on. Only worry is that if I have 2 possitives connected will it burn out my wires. What have others done.
1993 80 series, 4" tough dog adjustable bb lift kit, LPG, 35" MTR'S
brooksy wrote:Branden Tagg.....He is the King of all f@rkups & a Gimps bitch after hours
Re: Wiring spotlights into 80 series
Ok well I gave it a go and wired the earth off the relay to the terminal on the spotlight that looses voltage when the highbeams are turned on and guess what....It worked 
. Hope its not going to cause any other electrical problems.
. Hope its not going to cause any other electrical problems.1993 80 series, 4" tough dog adjustable bb lift kit, LPG, 35" MTR'S
brooksy wrote:Branden Tagg.....He is the King of all f@rkups & a Gimps bitch after hours
Who is online
Users browsing this forum: No registered users and 2 guests