I have a specialised 10amp 12volt motor that has burnt windings due to a switch shorting out.
Has anyone had any experience with having a 12v motor rewound?
Who can do this for me? Auto elec??
Is it cost effective vs getting a new motor ( I may not be able to replace the motor easily)
Can I expect the motor to be as good as it was previously?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
12volt motor rewind ???
Moderators: toaddog, TWISTY, V8Patrol, Moderators
12volt motor rewind ???
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Re: 12volt motor rewind ???
Very limited experience..... one 12V motor rewound. Used an industrial motor rewinder and it cost a fortune as it was the armature that went. A field winding will be cheaper IMO
If i could have replaced it it would probaby have been cheaper, but I couldn't so......
If i could have replaced it it would probaby have been cheaper, but I couldn't so......
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Re: 12volt motor rewind ???
cheers mighty mouse.
problem I have is it is a purpose made motor, with specific housing and drive gear, (not generic) and from what i can tell, its no longer in production.
it's still running, just gutless as. Will see how we go.
problem I have is it is a purpose made motor, with specific housing and drive gear, (not generic) and from what i can tell, its no longer in production.
it's still running, just gutless as. Will see how we go.
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Re: 12volt motor rewind ???
AFAIK there are people whose sole business is armature winding.
I recently spoke to the guy who sanded my floor and he had his sander motor rewound, apparently it is over fifty years old too.
http://www.yellowpages.com.au/search/li ... ST&x=0&y=0" onclick="window.open(this.href);return false;
Maybe try some of these guys, if they can't do it someone will know who can. Just a thought, I've never had it done myself.
I recently spoke to the guy who sanded my floor and he had his sander motor rewound, apparently it is over fifty years old too.
http://www.yellowpages.com.au/search/li ... ST&x=0&y=0" onclick="window.open(this.href);return false;
Maybe try some of these guys, if they can't do it someone will know who can. Just a thought, I've never had it done myself.
This is not legal advice.
Who is online
Users browsing this forum: No registered users and 0 guests