I am doing some research and need to find out what are common engine swaps for Suzikis.
Need to know what you guys upgrade with and which ones are most effective.
Thanks in advance.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Engine swaps
Engine swaps
Hi guys, Toyota man here
I am doing some research and need to find out what are common engine swaps for Suzikis.
Need to know what you guys upgrade with and which ones are most effective.
Thanks in advance.
I am doing some research and need to find out what are common engine swaps for Suzikis.
Need to know what you guys upgrade with and which ones are most effective.
Thanks in advance.
Re: Engine swaps
Most suzuki conversions involve upgrades to larger engines in the same series.
ie: G13ba(carby) upgrade to G16b(1.6 efi) or G13b(1.3 twincam efi).
m13a to m16a / m18a.
H20a to H25a / H27a.
A few engines from other OEM's have been common over the years.
Ie:
Toyota 4k/5k, Toyota 4age.
ie: G13ba(carby) upgrade to G16b(1.6 efi) or G13b(1.3 twincam efi).
m13a to m16a / m18a.
H20a to H25a / H27a.
A few engines from other OEM's have been common over the years.
Ie:
Toyota 4k/5k, Toyota 4age.
'95 Maruti lwb, 1.6GTI, 6.5:1, locked F+R, SPOA on 33's.
Re: Engine swaps
what are the plans for the rig struth?
I run a 20 Valve 4age Toyota injected 1.6 in mine. lot of work to get it right, even alot of work to do a marginal install with compromises. goes really well though!
I run a 20 Valve 4age Toyota injected 1.6 in mine. lot of work to get it right, even alot of work to do a marginal install with compromises. goes really well though!
Work - KPD4X4.COM - KPD Industries Australian Distributor of Diesel Power Modules - Germany.
Play - dank's zook
Play - dank's zook
Re: Engine swaps
I would have to say that the 1.6 EFi swap (g16) is about the best value swap.
The carb'd 1.6 swap is easy and can be done but a hammer some sticky tape and a few spanners and provides a very useful boost in power, but for all round driveability the Efi version is a class above.
The carb'd 1.6 swap is easy and can be done but a hammer some sticky tape and a few spanners and provides a very useful boost in power, but for all round driveability the Efi version is a class above.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
I've had a 4age powered SWB and have a 4agze and auto in the shed waiting to go into my LWB. If I was to start from scratch I'd probably just go with the g16 mpfi swap. It's been done a million times and has heaps of power for a zook.
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Re: Engine swaps
As mentioned...you best and cheapest option would be the EFI 1.6L from a Vitara or the rev happy 1.3L twincam from the Suzuki Swift GTi
Both are very simple conversions...pretty much a bolt on job for both
I lookied into putting a 4AGE into my sierra and looked at the fabrication and just how much work it was to get it in and decided against it
Instead went with the GTi conversion. Gearbox will bolt up to the engine and the engine mounts are even the same...plug 6 wires and sort out the dizzy (MK1 engines you can buy a $400 kit that will be a perfect drop or for MK2/3 you can buy a Mazda dizzy to modify it and make it work as they do fuel/spark as oposed to MK1's that only do spark)
Depends how much you want to spend and what terrain you're going to be driving
Just remember....the more power you put through the drive train....the more brakages you will have
Both are very simple conversions...pretty much a bolt on job for both
I lookied into putting a 4AGE into my sierra and looked at the fabrication and just how much work it was to get it in and decided against it
Instead went with the GTi conversion. Gearbox will bolt up to the engine and the engine mounts are even the same...plug 6 wires and sort out the dizzy (MK1 engines you can buy a $400 kit that will be a perfect drop or for MK2/3 you can buy a Mazda dizzy to modify it and make it work as they do fuel/spark as oposed to MK1's that only do spark)
Depends how much you want to spend and what terrain you're going to be driving
Just remember....the more power you put through the drive train....the more brakages you will have
Re: Engine swaps
Why are you wanting to do an engine swap? What are hoping to achieve? Is the current engine dead?
Ransom note = demand + collage
Who is online
Users browsing this forum: No registered users and 34 guests