Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
g'day folks
I am trying to work out just what this light means.
I am of the view that the "stabilizer", is that lever which is housed under the dash, and which, when released, allows the rear axle to travel down further than "normal" in off road conditions.
But I cant see any electrical connection to it which would indicate that it is "on" or "off"
Am I looking in the right place
cheers Angus
It's your rear sway bar release at the back, check that the sway bar link on the drivers side is pushed up (push it up by hand).
I assume you don't have a rear sway bar in? If you did it'd lock back in when the lever is pushed in and you go round a corner.
If you have a lift kit and you have not got lengthened sway bar links then the sway bar will often not click back into place easily just by driving. Best way is as mentioned above, lie under the car and push it up by hand until it clicks back into place. Then the light will go out on the dash
GQ Patrol Wagon, 6 point roll cage
351 cleveland, CHI heads, solid cam, Funnelweb single plane, 750 HP DP
do you have a factory rear locker that is activated via vacume / solenoid?
maybe the rear diff has been changed but all the wiring left in place so therefore the light will stay on all the time...
iv got factory rear locker in mine and the "stabi off" is only lit up once the locker is activated.. once disengaged the light goes out.
