Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

help ? v8 efi 304 issue in 4x4 (Mechanic)

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 156
Joined: Thu Feb 14, 2008 5:18 pm
Location: brisbane/Logan

help ? v8 efi 304 issue in 4x4 (Mechanic)

Post by biggsy »

G'day,

If there are mechanic a engine gurus.

Have the 304 efi v8 in my GQ

had the 4B idling for a bit and it just stopped and will not start now.
The 4B has not been for a run for over a year due more mods. But do start the car regularly and let idle for quite awhile....

Been through all the basic fuel,fuses,earthing ect

I have the holden manual and going through it at the moment.....

1 thing that i have notice the manual says do a ohms test on the injectors. replace if under 15 or over 17 ohms

Im getting a reading of high 14.8. Does that means there dead on the way out or dirty and need a clean. and will this effect the car cranking but not turning over.
!2v to the coil and power to the injectors tested....
Really don't want to take the 4B to a mechanic just yet as I enjoy working on the truck and wanting to learn more..
Cheers Jason
v8-gq
Posts: 780
Joined: Wed Apr 26, 2006 7:11 pm
Location: darwin again

Re: help ? v8 efi 304 issue in 4x4 (Mechanic)

Post by simkell »

I would start by draining the fuel and replacing the spark plugs. Fuel may of gone bad and now the plugs are fouled.
MUD, MUD, GLORIOUS MUD!
Posts: 1308
Joined: Tue Sep 23, 2003 10:17 pm
Location: BADFABING

Re: help ? v8 efi 304 issue in 4x4 (Mechanic)

Post by turbo gu »

Have you tested for spark? If you have no spark I would suggest the ignition module might have an issue(alloy finned box) try wiggling the wiring plug as you are cranking it over
GU 42td wagon for touring
GU ute for the fun stuff
http://www.allterrain4wd.org.au/
Posts: 1663
Joined: Mon Nov 04, 2002 6:38 pm
Location: bethania QLD

Re: help ? v8 efi 304 issue in 4x4 (Mechanic)

Post by oozuk »

turbo gu wrote:Have you tested for spark? If you have no spark I would suggest the ignition module might have an issue(alloy finned box) try wiggling the wiring plug as you are cranking it over

X2
Trying to finish the Zook

OOZUK buildup
http://www.outerlimits4x4.com/viewtopic.php?t=80949
***KING OF BLING***
Posts: 156
Joined: Thu Feb 14, 2008 5:18 pm
Location: brisbane/Logan

Re: help ? v8 efi 304 issue in 4x4 (Mechanic)

Post by biggsy »

I will give ignition module ago.
I did think of that after going through the manual. Will give a try I'm morning,
v8-gq
Posts: 5256
Joined: Fri Jun 16, 2006 6:49 pm
Location: Melbourne

Re: help ? v8 efi 304 issue in 4x4 (Mechanic)

Post by Struth »

oozuk wrote:
turbo gu wrote:Have you tested for spark? If you have no spark I would suggest the ignition module might have an issue(alloy finned box) try wiggling the wiring plug as you are cranking it over

X2
X3

Also check for 12v at the ignition modules input.

When you switch the key to on does your fuel pup run briefly?
Posts: 161
Joined: Mon Jan 10, 2005 9:34 pm
Location: Brisbane

Re: help ? v8 efi 304 issue in 4x4 (Mechanic)

Post by A.R.T Racing »

I'm not a mechanic by any means... But if it was my 304 i would check fuel is pumping into the rail (take off hose and put the hose into a jar and get someone to turn the key on) fuel should pour into jar. Then if it has petrol take out a spark plug and earth it then have someone start it to make sure it has spark.

These engines have a lot of electrics but with mine these two things have helped me locate no fuel pressure and a faulty ignition module. I know have a spare ignition module bolted under the dash so i can simply plug from one to the other to make sure its not the module.

If you have been working on it you might have knocked a wire off that is causing it not too fire, or batter not having enough charge.

Good luck!
GQ Ute V8, EFS lift, Silverstones.
Posts: 156
Joined: Thu Feb 14, 2008 5:18 pm
Location: brisbane/Logan

Re: help ? v8 efi 304 issue in 4x4 (Mechanic)

Post by biggsy »

Thanks for the replies guy's,

was the ignition module....thank f$%^, $180...made a big difference in the 4B....
Post Reply

Who is online

Users browsing this forum: No registered users and 134 guests