Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

jimny to monster.

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 1
Joined: Mon Jan 10, 2011 1:04 pm

jimny to monster.

Post by its a trap! »

well i have already a 2 inch lift but id love to know what tyres are best for my vehicle to really perform in sand and rocks. also i have questioned the 2 inch lift and wondered if i should add some spacers? please give some advice on how i can turn my jimny into a 4WD machine.
User avatar
Guy
Posts: 10366
Joined: Thu Dec 12, 2002 8:43 am
Location: Wangaratta

Re: jimny to monster.

Post by Guy »

read through this .. http://www.outerlimits4x4.com/viewtopic.php?f=7&t=48714" onclick="window.open(this.href);return false;
Then once you have more specific questions please ask .. currently your question is very very broad and you will not get any really useful responses. '


Welcome to the board.


(its a trap this not directed at you)
for the peanut gallery I will delete any non helpful responses.
" If governments are involved in the covering up the knowledge of aliens, Then they are doing a much better job of it than they do of everything else "
Posts: 1325
Joined: Wed Jul 04, 2007 4:13 pm
Location: brisbane australia..logan reserve

Re: jimny to monster.

Post by 11_evl »

as for a really non useful post, i find 40" maxxis trepadores very good on rock, i havnt confirmed but i think they will work ok in sand as well..

and they will definatly turn your jimny into a monster
michael
Posts: 1183
Joined: Tue Sep 22, 2009 10:24 pm
Location: In the Hills With a Riffle

Re: jimny to monster.

Post by V.W.Dave »

Spend megga $$$$$ or sell it for a leafy sierra and have $$$ left over.
Its a Jimny put a 2" lift on it and some A/T tyres and love it the way it is or get rid of it.
Posts: 8
Joined: Sat May 15, 2010 8:27 pm
Location: darwin

Re: jimny to monster.

Post by joel »

its a trap! wrote:well i have already a 2 inch lift but id love to know what tyres are best for my vehicle to really perform in sand and rocks. also i have questioned the 2 inch lift and wondered if i should add some spacers? please give some advice on how i can turn my jimny into a 4WD machine.
matey ive seen a jimny on carsales ages ago running 33''s. my mate is performing the same upgrade now. in short they used a 3'' lift with 1.5' custom coils spacers and many cutting disc on the angle grinder to cut away heaps of the guards. in short, it had no gearing and wasnt engineered, my mates jimny is getting engineered and he is going to run 32" x 10.5" simexes. also if u have bulk $$$ get coil overs. also will need engineers approval to be legal.
u will need reduction gears and upgrade the cvs and axles etc.
also remember the higher your lift the more likely u will have a lay down or worse, so only go as high as u need, not as high as will look good, cutting the hell outta the guards is the key.
Posts: 143
Joined: Tue Apr 18, 2006 9:54 pm
Location: Melbourne

Re: jimny to monster.

Post by Mud_Muncher »

joel wrote:
its a trap! wrote:well i have already a 2 inch lift but id love to know what tyres are best for my vehicle to really perform in sand and rocks. also i have questioned the 2 inch lift and wondered if i should add some spacers? please give some advice on how i can turn my jimny into a 4WD machine.
matey ive seen a jimny on carsales ages ago running 33''s. my mate is performing the same upgrade now. in short they used a 3'' lift with 1.5' custom coils spacers and many cutting disc on the angle grinder to cut away heaps of the guards. in short, it had no gearing and wasnt engineered, my mates jimny is getting engineered and he is going to run 32" x 10.5" simexes. also if u have bulk $$$ get coil overs. also will need engineers approval to be legal.
u will need reduction gears and upgrade the cvs and axles etc.
also remember the higher your lift the more likely u will have a lay down or worse, so only go as high as u need, not as high as will look good, cutting the hell outta the guards is the key.
I am running 34 - 9.5 super swampers on my 2001 jimny it has about a 3inch lift, standard difs and alot of cutting. I am running a 6.5 sierra case. I also have upgraded Yuvi Cvs. At the moment I am tearing of free wheeling front hubs (3 so far). I think it is to do with the spacer on them, I am now moving to drive flanges. Other things i break inlcude the transfer mounts. Most of my plastic flares are either gone or close to it and some of the panels are very rough. It is nice having A/C, power steering and coil springs though!
2001 Jimny, 34inch Swampers, 3inch springs, 1inch B/L, Arb bar, lightforce 170s, twin batteries, 6.5 transfer, twin airlockers, Warn M8000 winch.
Posts: 5226
Joined: Sun Jul 27, 2003 2:03 pm
Location: Sydney

Re: jimny to monster.

Post by Squik »

Ran 32's, 4in suspension + 3in body lift, minimal cutting, Sierra box with Rockhopper Series 3... no dramas, still pretty stable, no breakages, good fun :D
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Posts: 219
Joined: Mon Jul 11, 2011 7:48 pm
Location: Newcastle

Re: jimny to monster.

Post by SierraDan »

Squik wrote:Ran 32's, 4in suspension + 3in body lift, minimal cutting, Sierra box with Rockhopper Series 3... no dramas, still pretty stable, no breakages, good fun :D
Was this blue?
Posts: 5226
Joined: Sun Jul 27, 2003 2:03 pm
Location: Sydney

Re: jimny to monster.

Post by Squik »

Nope... mine was the red one called Stimpy (was featured in 4WD Action). The blue one belonged to RoboCop... bloody awesome machine, flexed like no tomorrow :armsup:
DRS smells like a cat-food milkshake... and wet socks... and gorgonzola cheese... all whizzed up in a blender
Posts: 7345
Joined: Wed Jun 02, 2004 3:29 pm
Location: Melbourne

Re: jimny to monster.

Post by Gwagensteve »

Squik wrote:Ran 32's, 4in suspension + 3in body lift, minimal cutting, Sierra box with Rockhopper Series 3... no dramas, still pretty stable, no breakages, good fun :D
That's exactly how Mud_Muncher's was set up. ( I think Mud Muncher's was Robocops) It kept having to lie down for little naps once it came down South. It now runs less suspension lift and no BL, and more tyre. Shocks are the same length from memory so it has the same flex. It flexes OK for what it is, however, It is quite stable now, and seems to drive quite well, but is right on the limit driveline wise.

Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Posts: 6221
Joined: Tue May 31, 2005 12:51 pm
Location: Sydney

Re: jimny to monster.

Post by v840 »

Gwagensteve wrote: That's exactly how Mud_Muncher's was set up. ( I think Mud Muncher's was Robocops) It kept having to lie down for little naps once it came down South. It now runs less suspension lift and no BL, and more tyre. Shocks are the same length from memory so it has the same flex. It flexes OK for what it is, however, It is quite stable now, and seems to drive quite well, but is right on the limit driveline wise.
Pics?
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests