Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

FJ 73 diffs

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 13
Joined: Sat Sep 08, 2007 6:35 pm
Location: gold coast

FJ 73 diffs

Post by toybrad »

Hi can anyone tell me are the diffs in a 75 the same as a 73 middy? :? Thanks for any help on this.
Top
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Re: FJ 73 diffs

Post by hulsty »

what years are both vehicles?
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Top
User avatar
Ice
Posts: 2429
Joined: Sun Jul 25, 2004 6:52 pm
Location: Central Coast, NSW

Re: FJ 73 diffs

Post by Ice »

in short yes

you havent said Z in the model designation so nothing should have a high pinion in it
xxxx wrote:
:bad-words: :snipersmile:
Top
Posts: 13
Joined: Sat Sep 08, 2007 6:35 pm
Location: gold coast

Re: FJ 73 diffs

Post by toybrad »

i have a 3rd mouth 87. i has just tring to getan idear on parts. its hard to find middy parts at a deacent price.
Thank for the feedback.
Top
Posts: 1715
Joined: Tue Sep 06, 2005 8:38 pm
Location: at my wits end

Re: FJ 73 diffs

Post by RED60 »

If you are going to do a swap, just make sure you get the same ratio in front and back..... there is a common ratio of 4.11:1 and an uncommon one 3.7:1... but they will both fit.... :cool: :cool:
Show me the money..SHOW ME THE MONEY
Top
Posts: 98
Joined: Fri May 15, 2009 8:55 pm
Location: brisbane

Re: FJ 73 diffs

Post by ndog »

yer but the later 75s have the smaller high pinion like the 80 series, i have a few parts and diffs laying around from my old bj73, cv , spindals new discs ect.
Top
Posts: 2183
Joined: Sun Feb 27, 2005 4:15 pm
Location: newy

Contact:
Contact evanstaniland

Re: FJ 73 diffs

Post by evanstaniland »

I thought all 75s ha the bug diffs it was the 78, 79, 70(new ones) series that had the smaller front!

Evan
www.energizedracing.com
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Top
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Re: FJ 73 diffs

Post by hulsty »

evanstaniland wrote:I thought all 75s ha the bug diffs it was the 78, 79, 70(new ones) series that had the smaller front!

Evan
Nopre, change was in 1990/91 when the 1HZ went in.
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Top
Posts: 352
Joined: Sun Aug 30, 2009 1:00 pm
Location: Australia

Re: FJ 73 diffs

Post by GO79 »

If you find two back diffs from 75s you can put one in the front of you middy
Top
Posts: 68
Joined: Wed Jun 01, 2005 12:36 pm
Location: Albany Creek

Re: FJ 73 diffs

Post by keencdk »

Also front and rear centres from 40 series and 60 series will fit fine. Note that with the 40 series most are fine spline 4.11 but some are 3.7 ratio and some may be course spline
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 72 guests