quick easy one guys,
just put the locker in the rear of my 40, and found the Ring gear has some small chips on the edge of the teeth, iv'e done some pricing, and wondering will a 60 series center fit my 40?
both are 4.11,
cheers O/L
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
40 diff centre
Moderators: toaddog, Elmo, DUDELUX
40 diff centre
" You can't fix it if you don't break it "
Re: 40 diff centre
Yeah no worries, 60 centre will fit.
If you are looking for a centre, I have a couple I pulled from my parts vehicle located in Albany Creek. A carton of beer would see one gone if you are interested.
If you are looking for a centre, I have a couple I pulled from my parts vehicle located in Albany Creek. A carton of beer would see one gone if you are interested.
Re: 40 diff centre
P.M.
sent,
can i ask how many splines on the 60 axle?
sent,
can i ask how many splines on the 60 axle?
" You can't fix it if you don't break it "
Re: 40 diff centre
30...
Re: 40 diff centre
so should be a straight bolt up then?
do many people run a 60 center in the 40?
do many people run a 60 center in the 40?
" You can't fix it if you don't break it "
Re: 40 diff centre
It will bolt straight in to all but the earliest 40s.. My 40s have 60 centres in them with air lockers, only because they were cheap and it was convenient at the time. I don't know what others do..
Re: 40 diff centre
good to know,
thanks vk7ybi and keencdk,
keep it loose,
thanks vk7ybi and keencdk,
keep it loose,
" You can't fix it if you don't break it "
Re: 40 diff centre
i've got a 60 center with an autolocker in the rear of my 40.. straight bolt up but again mine is an '84.
Re: 40 diff centre
cheers,
yea im running 84 diffs, oh and shorty ill have flex pics up soon, i did the 75 springs!!! flex is awesome,
yea im running 84 diffs, oh and shorty ill have flex pics up soon, i did the 75 springs!!! flex is awesome,
" You can't fix it if you don't break it "
Who is online
Users browsing this forum: No registered users and 152 guests