My compliance plate lists the model as NFX. Does anyone know what the "X" means.
Also, can anyone provide information on how to decode all the other information on a Pajeros compliance plate.
Thanks,
Sean.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Help Decoding a compliance plate
Moderator: -Scott-
Help Decoding a compliance plate
'88 NF SWB Intercooler TD, LSD (retired hurt), swaybays (in the garage), 6000lb winch, 2" suspension lift, 31x10.5R15 Goodyear Wrangler MT/R's, Shopping List (LONG).
I didn't think the 2.5 diesel was available in Aus with a Gen 1 swb let alone the TDI version ?? Is it an import or did you put that motor in ??
All my Paj stuff is packed up at the moment (shifting) so I can't help you with the VIN no data, maybe in a week or so when it's all upacked.
All my Paj stuff is packed up at the moment (shifting) so I can't help you with the VIN no data, maybe in a week or so when it's all upacked.
I just luv my "clacker Jabber"
I think you're correct about the 2.5 not being available in Oz Gen1 SWB Pajeros.
Mine is an import so there are quite a few differences to the models sold in Oz back in '88. Eg, trim level, electrics, disc/coil rear end. Other minor mechanical differences include odd size rear disc pad, oval air filter element (buggar to find - but not impossible) and apparently the Cam-belt is slightly different.
Once your settled back in, would certainly appreciate any info that you may have regarding original questions.
Thanks,
Sean.
Mine is an import so there are quite a few differences to the models sold in Oz back in '88. Eg, trim level, electrics, disc/coil rear end. Other minor mechanical differences include odd size rear disc pad, oval air filter element (buggar to find - but not impossible) and apparently the Cam-belt is slightly different.
Once your settled back in, would certainly appreciate any info that you may have regarding original questions.
Thanks,
Sean.
'88 NF SWB Intercooler TD, LSD (retired hurt), swaybays (in the garage), 6000lb winch, 2" suspension lift, 31x10.5R15 Goodyear Wrangler MT/R's, Shopping List (LONG).
Who is online
Users browsing this forum: No registered users and 0 guests