Hey guys,
Have been looking at getting one of these winches for a while. Was watching ebay and a working one went for around $1000. I have a mate that also has one but it doesn't work. I'm wondering what would be a fair offer for it and how much I would be looking at to get it rebuilt.
Thanks for any help!
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Warn 8274
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Re: Warn 8274
You need to know basically why it doesnt work?
There are a few things to go wrong, mechanically and electrically that can be easy or hard (min or max $$)
Bazzle
There are a few things to go wrong, mechanically and electrically that can be easy or hard (min or max $$)
Bazzle
Re: Warn 8274
About $800 is a fair price for a used high mount. cores suit reco up to $600. You can still see good ones fetching over $1000 on eBay
Like said you need to know whats wrong with it, or have a fair idea whats wrong.
Solenoids play up but normally allow it run in one direction. Brushes stick in the motor and could just need to be freed up, but sometimes cause motor burn out, as does over loading.
PM me if you need parts as Ive got lots of good stock bits left over from all the build ups I've done.
Also I can get new stuff out of the states at a good price.
Like said you need to know whats wrong with it, or have a fair idea whats wrong.
Solenoids play up but normally allow it run in one direction. Brushes stick in the motor and could just need to be freed up, but sometimes cause motor burn out, as does over loading.
PM me if you need parts as Ive got lots of good stock bits left over from all the build ups I've done.
Also I can get new stuff out of the states at a good price.
Living the dream on the hill that floods
Who is online
Users browsing this forum: No registered users and 19 guests