Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Stainless snorkel bending?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 55
Joined: Sun May 09, 2010 3:15 pm
Location: Sydney

Stainless snorkel bending?

Post by sir_142 »

Hey people,
Can any one recommend where in Sydney I should get a snorkel bent up in stainless for patrol? Was gonna try a exhaust shop like Liverpool or something, any ideas?
Cheers
Alex
Top
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: Stainless snorkel bending?

Post by 80's_delirious »

Given the size of a snorkel, I'd say they are generally welded up using pipe and pre formed bends, the smoothed off and pickled.
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Top
User avatar
DUDELUX
God of Umm
Posts: 4770
Joined: Sat Oct 27, 2007 11:21 pm
Location: im with Stuppedy

Re: Stainless snorkel bending?

Post by DUDELUX »

^^^ Thats what I did for my snorkel. Make sure its tig welded for a good finish.
MrsForby wrote: Oh I desperately truly love the taco.
Top
Posts: 55
Joined: Sun May 09, 2010 3:15 pm
Location: Sydney

Re: Stainless snorkel bending?

Post by sir_142 »

Fair enough, cheers guys...
Top
User avatar
DUDELUX
God of Umm
Posts: 4770
Joined: Sat Oct 27, 2007 11:21 pm
Location: im with Stuppedy

Re: Stainless snorkel bending?

Post by DUDELUX »

Heres what mine looked like on the Dudelux, red edition.
Image

Im planning on modifying the mount for the A-pillar then fitting it to the Dudelux, yellow edition.

I dont think you could bend the SS due to the thickness of the tube.
MrsForby wrote: Oh I desperately truly love the taco.
Top
Posts: 493
Joined: Tue Jan 08, 2008 2:25 pm
Location: Brisbane

Re: Stainless snorkel bending?

Post by Ricko »

Or you can use rubber bends.
Bambrick Media - www.bambrickmedia.com.au
Redlands 4WD Centre - www.redlands4wd.com.au
Swan's Water & Tipper Hire - 0414 628 011
Top
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Re: Stainless snorkel bending?

Post by Skegbudley »

Or buy a Millweld. ;)
GU Patrol with go better bits added
Top
Posts: 1740
Joined: Thu Mar 01, 2007 12:45 pm
Location: Brisneyland

Re: Stainless snorkel bending?

Post by RO8M »

Or use Tube (1.6mm wall) rather than pipe (2.11mm for 3" [80nb] sched 5, 3.05mm for sched 10) etc. and use bends, then tig it.
My name is Rob.

His name is Robert Paulson. His name is Robert Paulson. His name is Robert Paulson. His name is Robert Paulson.

This is legal advice.
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Re: Stainless snorkel bending?

Post by bru21 »

tube bends from midway metals in yatla.
rubber bends from a truck shop are about twice the cost.

Rubber is better for racing, s/steel for street
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 646
Joined: Thu Sep 07, 2006 10:51 pm
Location: Central Coast NSW

Re: Stainless snorkel bending?

Post by Clanky »

DUDELUX wrote:Heres what mine looked like on the Dudelux, red edition.
Image

Im planning on modifying the mount for the A-pillar then fitting it to the Dudelux, yellow edition.

I dont think you could bend the SS due to the thickness of the tube.
Nice snorkle, very neat . Looks like a different bloke cut the hole in the guard tho :lol:
Top
User avatar
DUDELUX
God of Umm
Posts: 4770
Joined: Sat Oct 27, 2007 11:21 pm
Location: im with Stuppedy

Re: Stainless snorkel bending?

Post by DUDELUX »

Yeah Mr Smarty-Pants.
The snorkel was tig welded by some specialist SS welders.
The guard was butchered by me, true ghetto fab at its finest right there. I dont own a holesaw, so I just used tin snips and sidecutters.
MrsForby wrote: Oh I desperately truly love the taco.
Top
Posts: 613
Joined: Sun Jun 28, 2009 1:44 pm
Location: qld

Re: Stainless snorkel bending?

Post by ledgend80 »

some put it up on this site or another one where some company in brisbane would do one piece stainless snorkels
home brew cooling in progress
Top
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Re: Stainless snorkel bending?

Post by Z()LTAN »

why one piece snorkels?

Ive crushed my snorkel twice now and each time i could replace the ss sections really easy.

Tube and rubber bends ftw
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Top
Posts: 490
Joined: Wed Mar 10, 2010 10:36 am
Location: Endeavour Hills, VIC

Re: Stainless snorkel bending?

Post by tehekho »

Z()LTAN wrote:why one piece snorkels?

Ive crushed my snorkel twice now and each time i could replace the ss sections really easy.

Tube and rubber bends ftw
Not to mention if it gets caught on something you'd rather it pull apart than pull off your fender...
ferog wrote:I've had worse smelling fingers though.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 26 guests