yeah I've got an update!
I've changed my mind again! haha
I would like to do a rego vitara with the motor and diff swap, but with babies and moneys I cant afford the time and money to put into a rego car!
so I have decided to go down the path of a truggy. Stupid me sold the LWB sierra for $500 with all the spare doors and front clip ect.
so I'm keeping an eye out for a sierra or vit that has a cab, doors, front clip and chassis! basically looking for someone like me who is selling a project car for cheap!
I have bush across the road to fang around in! I'm aiming for a fast and stable rock crawler. I'd like to do tuff truck again and the king of the rim at this stage!
on the motor side of things. its sitting on the garage floor on a home made engine holding device! all bolted together attempting to start it!
its not going yet. no spark and possibly no injector pulse. but I'm yet to look at injectors.
I got a new ecu for it, the one I had was an auto for an s15, which has different pinouts!
I worked out that when the high pressure fuel line blows and a bosch 044 is pushing the fuel, that it certainly can pump some fuel! I had a spark plug out checking for spark against the manifold at the time! haha, luck there was no spark!
I'm keen as, but it wont be a fast build! its been a few years already! but the pressure of not having to keep it regoed and if it breaks then it can sit in the garage until I save my money. also means I can go as hard as I want, because I dont have to drive it to work!
thats about it.
sorry to disappoint!
ashley
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
sr20det conversion
Re: sr20det conversion
build http://www.outerlimits4x4.com/ftopic130159.php&highlight=
IMHO = who cares if your Opinion is Humble! its your opinion isn't it?
so IMO it a waste of a H
IMHO = who cares if your Opinion is Humble! its your opinion isn't it?
so IMO it a waste of a H
Re: sr20det conversion
doing this at present with s14 sr20de and 5spd
running no jackshaft just a flange machined to the g/box yoke and mounted rather solidly to the t-case. no more pics for the next few weeks getting married
running no jackshaft just a flange machined to the g/box yoke and mounted rather solidly to the t-case. no more pics for the next few weeks getting married
_____
[olllllo]
[olllllo]
Re: sr20det conversion
will that work or will it get bad drive line vibrations and start leaking oil through the output seal
Re: sr20det conversion
iam bracing the g/box and transfer together as one to hopefully eliminate those issues
_____
[olllllo]
[olllllo]
Re: sr20det conversion
i think that will work a treat with it solidly mounted via braces to the box it will be just like any other 4b without a divorced transfer
Who is online
Users browsing this forum: No registered users and 5 guests