Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Which power upgrade chip, 2010 Patrol CRD

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 80
Joined: Mon Feb 04, 2008 10:08 pm
Location: WA

Which power upgrade chip, 2010 Patrol CRD

Post by BIGDAVET86 »

I am currently buying a 2010 3l patrol and am looking at putting a chip in it. Was wondering what others were using and what they like/dislike about them, and what they would recomend.

So far i like the look of the 'chip it' brand. I like the idea of having a pyro sensor being built into the equation. I would also probably block the EGR and i will get a 3" exh and dump pipe.

Any other advice or recomendations would be welcomed, as this is my first foray into electronic diesels. Have been a TD42t man for quite a while.

Cheers
Dave
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Re: Which power upgrade chip, 2010 Patrol CRD

Post by Skegbudley »

The Chip it chip has got some pretty good reviews on Patrol4x4.
The fact that it will adjust fuel depending on EGT is a very good thing.
GU Patrol with go better bits added
Posts: 2915
Joined: Tue Oct 05, 2004 11:29 am
Location: Sunshine Coast

Re: Which power upgrade chip, 2010 Patrol CRD

Post by Bingham »

I will be interested to hear how you go. Are these manufacturers going to honour warranty if nissan don't or the 1 in 3 chance it blows :D (or whatever the ratio is)??
2015 200 Series Gx TTD - ................ Fark 3L's -
Posts: 236
Joined: Fri Aug 20, 2010 12:59 pm
Location: Perth

Re: Which power upgrade chip, 2010 Patrol CRD

Post by CustomTurbos »

As far as I know, the EGT "adjustment" on Chipit is nothing more than one of those eBay "Auber" EGT gauges with built in relay control. These were designed for Kilns, to shut off the heater element. Anyone can retrofit one of those on any chip. Its a strictly on/off basis though.

There are other chips where you take an EGT input and drop fuel back on a fine tune basis - now that is cool (hot)
LX470 1HDFTE
Performance Direct Bolt On Turbos for: 1HDT/1HDFT/1HDFTE/12HT/13BT/1VDFTV/1KDFTV
Post Reply

Who is online

Users browsing this forum: No registered users and 111 guests