Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

loose knuckles

Tech talk for Hilux

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 53
Joined: Mon Jun 14, 2010 5:01 pm
Location: central coast n,s,w

loose knuckles

Post by xj33 »

i just replaced the front axle & cvs on my hilux but now the passanger side steering knuckle is loose , how do i tighten it up
Top
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Re: loose knuckles

Post by Mr DJ »

If the knuckle is loose, then one or both of the bearings are shot.
I would pull both sides down, rebuild them and do the job right once ;)
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Top
Posts: 177
Joined: Mon Oct 06, 2008 8:22 pm
Location: Tasmania

Re: loose knuckles

Post by Dannyboy »

Or did you leave the shims out on the king pins they set the pre load on the knuckle
Top
Posts: 53
Joined: Mon Jun 14, 2010 5:01 pm
Location: central coast n,s,w

Re: loose knuckles

Post by xj33 »

yeah i have put the shims back in exactly the same as they come out.will buy new bearings and try that
Top
Posts: 53
Joined: Mon Jun 14, 2010 5:01 pm
Location: central coast n,s,w

Re: loose knuckles

Post by xj33 »

put new bearings in and now its all good
Top
Post Reply

Return to “Hilux”

Who is online

Users browsing this forum: No registered users and 5 guests