Two years after the SAS and rear suspension mods I am finally getting around to finessing the job.
With roll centres and panhards my thoughts are that the lower the roll center is at the panhard the less stable the ride or easier it is to tip over, or is it vice versa?
I just imagine that with a lower roll centre more of the vehicles weight is rolling above that roll centre so it would be less stable.
But something tells me I have it all wrong too.
So some advice is needed please peoples.
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
school me on roll centres again.
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Re: school me on roll centres again.
Maybe not a popular link but this is a great write up on suspension.
http://www.rockracing4x4.com/forums/sho ... ull-O-Tech
Cheers
Steve
http://www.rockracing4x4.com/forums/sho ... ull-O-Tech
Cheers
Steve
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346j-top paj wrote:gayer than jizz on a beard
Re: school me on roll centres again.
If I click on that will I get banned
Re: school me on roll centres again.
I don't think so. I've clicked on it and my computer didn't blow up.
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346j-top paj wrote:gayer than jizz on a beard
Re: school me on roll centres again.
good link, seems my theory is correct.
Thanks
Thanks
Re: school me on roll centres again.
dont forget the relation between the front and rear roll center also...
Re: school me on roll centres again.
Yep, need to read the link a few times, but good info in there.
Who is online
Users browsing this forum: No registered users and 2 guests