Anyone ever seen this done?
Whats the deal with the 727 in Rangies, is it common to all other 727's ie if you swap bellhousings or get the right one to mate to a 440 and use the Rangie adapter to tcase all bolts up?
Just curious.
Just finished perusing and old issue of 'engines' by Hot Rod magazine and got all excited about a 550hp big block, salisbury diffed, Range Rover project............
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
mopar 440 + 727 into RR
Moderator: Micka
no, if you remove the rover-727 adapter you are left with an international harvester bolt pattern. the "rover" 727 is actually just an IH cased 727 with an adapter. why i dont know.
what you could do, however, is get a dodge 4wd 727 and use the 727-LT230 adapter from a range rover. this, combined with all of the std range rover shift linkage for a 727 and all, would allow you to drop in a 440 or whatever you wanted with minimal effort.
what you could do, however, is get a dodge 4wd 727 and use the 727-LT230 adapter from a range rover. this, combined with all of the std range rover shift linkage for a 727 and all, would allow you to drop in a 440 or whatever you wanted with minimal effort.
Adam
1964 Land Rover 88", modifications in progress
1964 Land Rover 88", modifications in progress
Yep - the 727 is the same as the international scout with an adapter on the front, an extension housing on th rear and a rear spudshaft. It bolts up to a lt230.
Had one in my shed for a while and sold it to "bobtail"on this site.
They do come up every now and then in the trading post up here for about $600 or so. Its just a matter of finding one.
Sam
Had one in my shed for a while and sold it to "bobtail"on this site.
They do come up every now and then in the trading post up here for about $600 or so. Its just a matter of finding one.
Sam
Strange Rover wrote:Yep - the 727 is the same as the international scout with an adapter on the front, an extension housing on th rear and a rear spudshaft. It bolts up to a lt230.
Had one in my shed for a while and sold it to "bobtail"on this site.
They do come up every now and then in the trading post up here for about $600 or so. Its just a matter of finding one.
Sam
Sams right I removed all the range rover gear and bolted a dana transfer box . Behind a 3.9 Isuzu . Straight into a Scout
Who is online
Users browsing this forum: No registered users and 35 guests