Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
help power windows won't wind up
Moderator: -Scott-
help power windows won't wind up
So its got power, and have checked all wires for continuity and all is good wiring wise. Some times it works some times it doesn't. at this point can be either switch or window regulator itself.sometimes hitting the door will make it work. Any idea on which it may be or at the very least as a huge storm is coming how to force it to wind up.
93 RV, 5 in tough dog lift, dobinsons shocks and coils, PA, dual fuel, many many oil leaks and a ton of character.
Re: help power windows won't wind up
Probably little too late but pull the switches out of the door and strip the unit right down, be very careful not to loose any small parts. There are little metal contacts in the unit, these loose there ability to work over time and just need a little polish, and bob's your uncle you have working windows again. Done mine on saturday.
1993 80 series, 4" tough dog adjustable bb lift kit, LPG, 35" MTR'S
brooksy wrote:Branden Tagg.....He is the King of all f@rkups & a Gimps bitch after hours
Re: help power windows won't wind up
Motors dead checked power to motor with switch in loop and was getting 12.4 volt to motor even tried connecting.it.straight to power. Had to remove motor and some well placed tec screws and.cables.ties to hold window shut
93 RV, 5 in tough dog lift, dobinsons shocks and coils, PA, dual fuel, many many oil leaks and a ton of character.
Re: help power windows won't wind up
I've had this problem with DC motors before.
If one rotor winding is open circuit, and that's the winding on which the motor stops, it won't start again. Sometimes, give it a thump and a little movement can get the brushes to contact an adjacent winding, and away it goes. Until the next time it stops.
When my Paj did this, I replaced the motor (which meant entire mechanism...)
If one rotor winding is open circuit, and that's the winding on which the motor stops, it won't start again. Sometimes, give it a thump and a little movement can get the brushes to contact an adjacent winding, and away it goes. Until the next time it stops.
When my Paj did this, I replaced the motor (which meant entire mechanism...)
Who is online
Users browsing this forum: No registered users and 0 guests