Hey guys just a quick question, I'm about to buy a set of treps in 35's (radials) maxxis recommends 10" rims but I have heard of people running 8" rims.. Can I run them on 8's or not?
Cheers
Brad
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Maxxis trepador's 35x12.5 radials, 8 or 10" rim
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Maxxis trepador's 35x12.5 radials, 8 or 10" rim
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Re: Maxxis trepador's 35x12.5 radials, 8 or 10" rim
Hey mate,
They'll be fine on an 8" rim. I reckon they hold their bead better on 8" rims too.
The tyres crown more on a narrow rim and will wear a little quicker. You could reduce pressures a little to compensate but then risk overheating them and increased full consumption from the greater rolling resistance.
They'll be fine on an 8" rim. I reckon they hold their bead better on 8" rims too.
The tyres crown more on a narrow rim and will wear a little quicker. You could reduce pressures a little to compensate but then risk overheating them and increased full consumption from the greater rolling resistance.
Re: Maxxis trepador's 35x12.5 radials, 8 or 10" rim
i run mine on 8" rims, 35 psi, and are wearing even. Havent had any dramas.
D22 Navara....hydro coilovers, hydro steer, 42's...
76 Landcruiser tow rig
76 Landcruiser tow rig
Re: Maxxis trepador's 35x12.5 radials, 8 or 10" rim
Thanks front the reply's, saves me buying new rims..
Also do you know of a workshop that will supply and fit staun internal beadlocks?
Cheers
Brad
Also do you know of a workshop that will supply and fit staun internal beadlocks?
Cheers
Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Who is online
Users browsing this forum: No registered users and 1 guest