Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

80 series and 3grand to spend

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 98
Joined: Fri May 15, 2009 8:55 pm
Location: brisbane

80 series and 3grand to spend

Post by ndog »

hey guys i got 3 grand to spend on my 80 , got a 2'' lift in it now bout it want a little bigger but i thik it can wait, i want to get sliders with scrub bars rear bar tyres winch ect just wondering what i should do first , was thinking tyres and sliders first,
Posts: 986
Joined: Tue Nov 11, 2008 7:17 pm
Location: Brisbane

Re: 80 series and 3grand to spend

Post by TheBigBoy »

Suspension and tyres :).
Road Ranger
Posts: 10722
Joined: Fri Nov 12, 2004 12:21 pm
Location: In a town near you

Re: 80 series and 3grand to spend

Post by Tiny »

Tyres, sliders and coil spacers
If the above post did not offend you in any way please PM me so I can try harder!!
Posts: 1105
Joined: Wed Jan 23, 2008 8:56 pm
Location: central coast down under

Re: 80 series and 3grand to spend

Post by stilivn »

Tiny wrote:Tyres, sliders and coil spacers
X2. If you can hold out a bit im waiting till end of march to see if goodyear do there 4 for price of 3 yearly tire sale again. That would give you a bit more coin for something else ie cheap winch.
1993 80 series, 4" tough dog adjustable bb lift kit, LPG, 35" MTR'S
brooksy wrote:Branden Tagg.....He is the King of all f@rkups & a Gimps bitch after hours
Posts: 986
Joined: Tue Nov 11, 2008 7:17 pm
Location: Brisbane

Re: 80 series and 3grand to spend

Post by TheBigBoy »

If he goes higher in suspension even with coil spacers. He will have to address caster issues. So why not just do it right the first time.
Posts: 1105
Joined: Wed Jan 23, 2008 8:56 pm
Location: central coast down under

Re: 80 series and 3grand to spend

Post by stilivn »

TheBigBoy wrote:If he goes higher in suspension even with coil spacers. He will have to address caster issues. So why not just do it right the first time.
Because of his other thread
ndog wrote:looks nice yer thats good idea have thought that but just want it to sit higher my 2'' looks like stock hight want more clearance
So spacers 1inch would lift it back to a 2inch lift no need for castor correction.
And sliders would let him go alot harder without damaging the sills.
1993 80 series, 4" tough dog adjustable bb lift kit, LPG, 35" MTR'S
brooksy wrote:Branden Tagg.....He is the King of all f@rkups & a Gimps bitch after hours
Posts: 986
Joined: Tue Nov 11, 2008 7:17 pm
Location: Brisbane

Re: 80 series and 3grand to spend

Post by TheBigBoy »

Ah ok.
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: 80 series and 3grand to spend

Post by 80's_delirious »

3G's??

tyres, sliders, lockers.

leave it at 2" lift.

If you want it to look tough, go for low, big rubber, get it all barred up and it will look tougher than lifting it 9" like a pootrol
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Posts: 98
Joined: Fri May 15, 2009 8:55 pm
Location: brisbane

Re: 80 series and 3grand to spend

Post by ndog »

cheers guys yer want suspension but want to do it properly get the best and cant do that and get other shit , so tyres for traction and sliders first and c wat coil i got left , would wait till end of march but goin away begging of april so kinda want everything sorted cheer
Posts: 367
Joined: Sun Oct 04, 2009 5:50 pm
Location: Penrith, Sydney

Re: 80 series and 3grand to spend

Post by howsie »

With a 3 inch on the suspension castor.is bearable (or so I've been told). I'd get 3 inch coils 4 inch shocks. Sliders and.winch.
93 RV, 5 in tough dog lift, dobinsons shocks and coils, PA, dual fuel, many many oil leaks and a ton of character.
Posts: 986
Joined: Tue Nov 11, 2008 7:17 pm
Location: Brisbane

Re: 80 series and 3grand to spend

Post by TheBigBoy »

howsie wrote:With a 3 inch on the suspension castor.is bearable (or so I've been told). I'd get 3 inch coils 4 inch shocks. Sliders and.winch.
It is definately not bearable if used as a road car (unless you like it handling like a pig). Your caster will be at -2.16 degrees with 3". Perfect caster is +3 degrees. So you will need 5.16 degrees of possitive caster correction for 3" of lift. Ill affect start to happen at 0 degrees. So your well into that. To put that in perspective 2" of lift is -0.44 and right on border line.

Meaning anything over 2", caster should definately be addressed.
Posts: 367
Joined: Sun Oct 04, 2009 5:50 pm
Location: Penrith, Sydney

Re: 80 series and 3grand to spend

Post by howsie »

Well in that case it would be tyre barwork winch. I got my car with the lift done so haven't had personal experience with lifts
93 RV, 5 in tough dog lift, dobinsons shocks and coils, PA, dual fuel, many many oil leaks and a ton of character.
Posts: 1846
Joined: Fri Oct 31, 2008 2:18 pm
Location: Brisbane

Re: 80 series and 3grand to spend

Post by SCANAS »

Tyres for sure. I would go sliders before a winch.
I'm not quitting drinking, I'm retiring at the top of my game - sporting comeback likely.
Posts: 493
Joined: Tue Jan 08, 2008 2:25 pm
Location: Brisbane

Re: 80 series and 3grand to spend

Post by Ricko »

Do you want a tourer or a basher?

For a basher:

If you can fit the suspension yourself and make your own sliders, you could achieve all three.

1. Tyres - see Ryan at Fourbys
2. Sliders - make you own, just use 50mm box
3. Suspenion 4" coils and shocks + castor correction and brake lines. - Pete at Redlands 4wd will get the setup you're chasing.

When you save enough coin, throw a locker in. But I would do the above first.

Tourer

Suspension you have is fine.
Tyres for sure
Sliders uneccessary.
Bambrick Media - www.bambrickmedia.com.au
Redlands 4WD Centre - www.redlands4wd.com.au
Swan's Water & Tipper Hire - 0414 628 011
Posts: 98
Joined: Fri May 15, 2009 8:55 pm
Location: brisbane

Re: 80 series and 3grand to spend

Post by ndog »

yer goin to be a tourer well im getting tyres this weekend , i would make them but dont have the place or equiptment to do it.
Posts: 493
Joined: Tue Jan 08, 2008 2:25 pm
Location: Brisbane

Re: 80 series and 3grand to spend

Post by Ricko »

ndog wrote:yer goin to be a tourer well im getting tyres this weekend , i would make them but dont have the place or equiptment to do it.

Well in that case a 2"lift is fine, get a good set of tyres like you said and get luxury things like awnings and draws etc. A 2"lift and 33s will get you most places in Australia touring wise. A locker would be better than more lift. Wouldn't be fussed on sliders, rather a strong set of steps would do.
Bambrick Media - www.bambrickmedia.com.au
Redlands 4WD Centre - www.redlands4wd.com.au
Swan's Water & Tipper Hire - 0414 628 011
Posts: 168
Joined: Sun Nov 30, 2008 4:44 pm
Location: Sydney

Re: 80 series and 3grand to spend

Post by popeyehj60 »

is the car mechanically sound.
one of the main things a tourer has to be is reliable.
if i had 3 grand spare id make sure the car is 100 percent. no point having new tyres and sliders if the car isnt mechanically sound enough to leave the cities
Posts: 493
Joined: Tue Jan 08, 2008 2:25 pm
Location: Brisbane

Re: 80 series and 3grand to spend

Post by Ricko »

popeyehj60 wrote:is the car mechanically sound.
one of the main things a tourer has to be is reliable.
if i had 3 grand spare id make sure the car is 100 percent. no point having new tyres and sliders if the car isnt mechanically sound enough to leave the cities
Good point.
Bambrick Media - www.bambrickmedia.com.au
Redlands 4WD Centre - www.redlands4wd.com.au
Swan's Water & Tipper Hire - 0414 628 011
Posts: 98
Joined: Fri May 15, 2009 8:55 pm
Location: brisbane

Re: 80 series and 3grand to spend

Post by ndog »

well got tyres yesterday still got 2g left, does any1 know someone who make them want sliders with rails, car is running prittygood ive got another 1500 for that part though want to do timing belt service tune up and get everything looked over
Posts: 4737
Joined: Wed May 12, 2004 10:39 pm
Location: Brisbane

Re: 80 series and 3grand to spend

Post by De-lux »

Dual auto lockers ($500 + $700 to be installed by mechanic) $1200
Second hand tyres and rims $800
Tigerz11 Winch $700
6 cartons of beer $300
TOTAL $3000
indubitably
Posts: 98
Joined: Fri May 15, 2009 8:55 pm
Location: brisbane

Re: 80 series and 3grand to spend

Post by ndog »

ha good call especially the piss was looking at winch might get sliders and winch still got a fair few weeks to go so might b able to get a few more dollas together
Posts: 8556
Joined: Mon Jun 13, 2005 9:34 pm
Location: Sydney

Re: 80 series and 3grand to spend

Post by RockyF75 »

If your getting a Tigerz11 winch, wait a week or so. I rand up the warehouse earlier this month, and they reckon they are going direct to the public 1st of March, so should be a fair bit cheaper :armsup:
60 + Turbo, 33"s :armsup:
Posts: 98
Joined: Fri May 15, 2009 8:55 pm
Location: brisbane

Re: 80 series and 3grand to spend

Post by ndog »

yer cheers rocky , so does any1 know any1 who makes sliders or any 4 sale and where would b the cheapest place to buy an engle fridge?
Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests