Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Gen 1 gearbox compatibility

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Post Reply
Posts: 791
Joined: Fri Mar 17, 2006 7:45 pm
Location: Gold Coast QLD

Gen 1 gearbox compatibility

Post by NCpaj »

Hey fellas...

Well my gearbox finally let go in the paj last night.

back in 2004 i had it neutralize between gears in the middle of a hill climb, Myself and some mates did a dodgy fix and managed to get it driving again albeit with alot more slop between gears with a couple of hammers and some screw drivers.

Being a weekend car never really worried about it till i only had 1st, 3rd and 4th on the way home last night.


Anyway long story short ive been looking at just swapping out the box and it seems (From the tech data base) that any 4cyl manual gearbox from 83-88 will fit.
So does that mean that the diesels run the same ratio'd KM145??

Cheers
Real men smoke clutches
86' Pajero
2" OME, steel bar goodness, MTZ's, Exxon Valdez-esk fuel consumption
Posts: 14
Joined: Sun Jul 17, 2011 6:34 pm
Location: Redbank Plains, QLD

Re: Gen 1 gearbox compatibility

Post by Beer Baron »

I don't know if the diesel box is the same but I've got 2 5 speeds and 2 transfers. Both from 2.6 petrol's.

One is noisy but still drives fine and the other is quiet and drives fine. Pm me if ya want them.
1986 SWB NC Pajero.
Posts: 1
Joined: Sun Jan 16, 2011 10:40 pm

Re: Gen 1 gearbox compatibility

Post by shane6405 »

send me pm got a na to go blon head no rust
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests