rear GU/GQ tailshaft

[Cokeaddict]

Anyone know if the rear GU Tailshaft is the same as the GQ one for a LWB 4.2D. Gotta replace uni's and i think it would be cheaper to get a GU one from a wrecker. Plus the fact that the slide shaft would probably have less wear than my GQ one has.
Anyone..?
Ange

[turps]

Uni's are about $30 bucks each. Last time I brought them.

[Cokeaddict]

Yeh Turps i know mate but they dont last long. I have replaced 4 in the past 3 years. Seems I always end up with one cone that gets lumpy. Have tried Repco and supercheap ones.
Was thinking if i find a GU with low kms, I can get me a tailshaft with its genuine uni's still on it that will last for a few years (being the original nissan ones). Plus the fact that the slide shaft will not have as much wear as mine does....could be a plus for vibrations.
Ange

[toughnut]

it'll bolt straight up.

[Cokeaddict]

Thats great news.
Thanks very much
Ange

[Judge]

Hello, I have a 89GQ lwb and had to replace one uni in the rear tail shaft and one in the front shaft and the rear uni was the same as a 2010 3lt ute and it cost me $110 gen and put a non gen for the front and it cost me $25 But next time i will put gen in the front !!!!Cheers Rick.