Hey everybody,
ive done a bit of a search but found no info.
I have a 05 GU with the zd30 auto. Driving along and it felt like it dropped out of gear for a second and then went back in and then nasty noises and then it stalled.
Tried to restart and it sounded like the starter motor was spinning but not engaging. Pulled starter out it seems fine, turned ring gear with a screwdriver, it spins freely and front of engine does not turn.
Suspect either broken flywheel bolts or even worse broken end of crank.
Does anyone know about or had this prblem before?
Any help would be great.
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
zd30 broken crank/flywheel bolts ???
Re: zd30 broken crank/flywheel bolts ???
they do brake cranks not real common but..
r u sure its not the timing chain and gear set in the front. thats is more liks the issue..
i build 3 here a week.. $6600 checked pump and injectors.. full build new everything. if u need it.0438279890
r u sure its not the timing chain and gear set in the front. thats is more liks the issue..
i build 3 here a week.. $6600 checked pump and injectors.. full build new everything. if u need it.0438279890
build em tuff, drive em ruff.........
Custom 4wd Creations Brisbane
0438279890
Custom 4wd Creations Brisbane
0438279890
Re: zd30 broken crank/flywheel bolts ???
Is the ring-gear still attached to the flywheel?
Sounds like you need to strip it further either way.
Sounds like you need to strip it further either way.
Re: zd30 broken crank/flywheel bolts ???
Failed dual mass flywheel?
Joel
Joel
4B Fabrications & Perfomance Tuning
1/12 Industry Blvd.
Carrum Downs
http://www.4bfabrications.com.au" onclick="window.open(this.href);return false;
1/12 Industry Blvd.
Carrum Downs
http://www.4bfabrications.com.au" onclick="window.open(this.href);return false;
Who is online
Users browsing this forum: No registered users and 57 guests