hello
just looking at putting a electronic distributor into my 3y hilux and need help can't find any info on doing it
The distributor i have been giving by a mate has got two wires running out of it and he said that he has been told that
one wire is power and the is earth the trouble is that the wires are one is black with a red strip and the other is
black only (can put pictures up) but he doesn't know which is what
also he said it's got the coil built into it so thats why i am have a problem
i got no problems in putting it into car but i don't want to wire it up wrong
thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
electronic distributor into hilux 3y
Moderators: toaddog, Elmo, DUDELUX
electronic distributor into hilux 3y
toyota ln130 surf leaf sprung front and rear lockers front and rear 35's lift and all the rest
Re: electronic distributor into hilux 3y
I would say...
Black with red trace = power
Black = earth
You will need to ensure that the old ignition feed to the coil is 12v. If a ballast resistor is fitted remove it.
If the new dissy has coil in cap it just needs the 12V power and earth hooked up.
Black with red trace = power
Black = earth
You will need to ensure that the old ignition feed to the coil is 12v. If a ballast resistor is fitted remove it.
If the new dissy has coil in cap it just needs the 12V power and earth hooked up.
Re: electronic distributor into hilux 3y
ok thanks
i will get the multi meter out and check the setting thanks
i will get the multi meter out and check the setting thanks
toyota ln130 surf leaf sprung front and rear lockers front and rear 35's lift and all the rest
Who is online
Users browsing this forum: No registered users and 0 guests