I fitted Haultech CVs to my GQ front diff on Thursday. When I greased them, I noticed that they were incredibly tight. I knew that they are tighter than the standard CVs, but I had to pull like an ox to bend them from straight to full lock on the bench.
Anyway, I fitted them and the test drive with hubs locked was fine (i.e. no suspicious noises), but I noticed that the steering would not return to center (last 3/4 of the steering wheel turn) without assistance when the hubs were unlocked.
I want to know if this behavior is normal or if my CVs are too tight?
Cheers
Joachim
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Haultech CV question
Re: Haultech CV question
Have they freed up for you now Joachim...give me a call if you are having any dramas with them...
Dave
Dave
www.bolsys.com.au
the original and the best
the original and the best
Who is online
Users browsing this forum: No registered users and 121 guests