Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
McNamara single piece cross shaft - GROUP BUY
Moderator: Micka
McNamara single piece cross shaft - GROUP BUY
There are a few boys on Pirate4x4 that have expressed interest in buying a McNamara single piece cross shaft for their LT230 transfers.
I'm posting up here to see if there is an interest to get enough numbers for a decent group buy. The last one we had on here yielded a fairly good discount on Maxi-Drive transfer gears, so they do work and can get you a good discount.
For those who don't know, the single piece cross shaft is one of the 'must really do that one day' modifications for the LT230 that pretty well removes the only weak link in the case. The OEM shaft is 2 pieces and has been known to fail leaving you with no drive and what can be a costly repair, depending on what else happens to break. The OEM shafts have cut outs in them and they overlap (like joining two pieces of timber) whereas the single piece cross shaft is a one piece design that is much stronger.
So if getting offroad is something you tend to do in your Rover, then get a cross shaft from McNamara.
Group buy starts here:
Who is in? Prices will depend on numbers, but I think they're around the $110 mark.
Micka
I'm posting up here to see if there is an interest to get enough numbers for a decent group buy. The last one we had on here yielded a fairly good discount on Maxi-Drive transfer gears, so they do work and can get you a good discount.
For those who don't know, the single piece cross shaft is one of the 'must really do that one day' modifications for the LT230 that pretty well removes the only weak link in the case. The OEM shaft is 2 pieces and has been known to fail leaving you with no drive and what can be a costly repair, depending on what else happens to break. The OEM shafts have cut outs in them and they overlap (like joining two pieces of timber) whereas the single piece cross shaft is a one piece design that is much stronger.
So if getting offroad is something you tend to do in your Rover, then get a cross shaft from McNamara.
Group buy starts here:
Who is in? Prices will depend on numbers, but I think they're around the $110 mark.
Micka
Re: McNamara single piece cross shaft - GROUP BUY
Put me down micka as i think i may have damaged mine on SaturdayMicka wrote:There are a few boys on Pirate4x4 that have expressed interest in buying a McNamara single piece cross shaft for their LT230 transfers.
I'm posting up here to see if there is an interest to get enough numbers for a decent group buy. The last one we had on here yielded a fairly good discount on Maxi-Drive transfer gears, so they do work and can get you a good discount.
For those who don't know, the single piece cross shaft is one of the 'must really do that one day' modifications for the LT230 that pretty well removes the only weak link in the case. The OEM shaft is 2 pieces and has been known to fail leaving you with no drive and what can be a costly repair, depending on what else happens to break. The OEM shafts have cut outs in them and they overlap (like joining two pieces of timber) whereas the single piece cross shaft is a one piece design that is much stronger.
So if getting offroad is something you tend to do in your Rover, then get a cross shaft from McNamara.
Group buy starts here:
Who is in? Prices will depend on numbers, but I think they're around the $110 mark.
Micka
Re: McNamara single piece cross shaft - GROUP BUY
could be keen michael maybe for 2....
1986 - Stage 1 V8 serIII style side ute - gone
1997 - 300 TDI 130 single cab ute - gone
1986 - 90 defender soft top, bars, buttons and tyres
2000 - TD5 disco 'the boss's rig'
1997 - 300 TDI 130 single cab ute - gone
1986 - 90 defender soft top, bars, buttons and tyres
2000 - TD5 disco 'the boss's rig'
Twisted by Design
Re: McNamara single piece cross shaft - GROUP BUY
Keen too.
2012 FJ Cruiser
1984 BJ42 - Stretched and Coilovered
1977 HJ45
1984 BJ42 - Stretched and Coilovered
1977 HJ45
Re: McNamara single piece cross shaft - GROUP BUY
I already have one, but it may be easier (to deal with ) Ashcrofts to get them, i ordered a LT230 rebuild kit from them and cross shaft, had it in 5 days from the UK.
Damien
--------------------------------------------------------
--------------------------------------------------------
Re: McNamara single piece cross shaft - GROUP BUY
Yea I need one
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
http://www.facebook.com/budscustoms
Re: McNamara single piece cross shaft - GROUP BUY
Benny, Are you pulling the welded centre out of the moonbuggy???
Even with a single piece cross shaft and new thrust washers, it'll flog out in about 3-4 runs/digs/sessions.
Even with a single piece cross shaft and new thrust washers, it'll flog out in about 3-4 runs/digs/sessions.
Re: McNamara single piece cross shaft - GROUP BUY
dck7aok wrote:Benny, Are you pulling the welded centre out of the moonbuggy???
Even with a single piece cross shaft and new thrust washers, it'll flog out in about 3-4 runs/digs/sessions.
How's that? Isn't the point of the one piece shaft too "weld" the diff and make it (front eng) rear wheel drive?
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
http://www.facebook.com/budscustoms
Re: McNamara single piece cross shaft - GROUP BUY
my understanding is that the one piece just strengthens the diff, you would need a spool if you wanted to weld it without welding, as far as im aware no one makes one
Re: McNamara single piece cross shaft - GROUP BUY
Heavy Duty LT 230 Cross Pin
The standard LT230's have a two piece cross pin in the centre diff, this is two shafts with a cut out in the centre so they can overlap.
Last ones I got from McNamara were $150 inc shipping to Qld.
Last I spoke to them they were out of stock and not doing anymore.
Group buy might convince them.
Dan.
Re: McNamara single piece cross shaft - GROUP BUY
Yea could be keen
www.energizedracing.com
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Re: McNamara single piece cross shaft - GROUP BUY
$150, is that gold plated. Ashcrofts work out about $72 plus frieght on top. My whole LT230 rebuild kit and cross pin was around $300 landeddck7aok wrote:
Heavy Duty LT 230 Cross Pin
The standard LT230's have a two piece cross pin in the centre diff, this is two shafts with a cut out in the centre so they can overlap.
Last ones I got from McNamara were $150 inc shipping to Qld.
Last I spoke to them they were out of stock and not doing anymore.
Group buy might convince them.
Dan.
Damien
--------------------------------------------------------
--------------------------------------------------------
Re: McNamara single piece cross shaft - GROUP BUY
Yea checkt the Ashcroft site last nite and way cheaper than $150
www.energizedracing.com
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Re: McNamara single piece cross shaft - GROUP BUY
Oi! dont show pictures of my special 'shim-free' broken junk! (everyone will want one!)dck7aok wrote:
Just get one from Ashcrofts. miles cheaper and easier to deal with.
Re: McNamara single piece cross shaft - GROUP BUY
This it what it looks like with the new one:
Re: McNamara single piece cross shaft - GROUP BUY
Yes Ashcroft is WAY cheaper.
McNamara will do them at $145 each. Told him that the Ashcroft ones were half the price and he suggested to shop there.
McNamara will do them at $145 each. Told him that the Ashcroft ones were half the price and he suggested to shop there.
Re: McNamara single piece cross shaft - GROUP BUY
Just to add, Micka, put me down for 1 definetely, maybe 2 depending on the final cost. (if they are from Ashcrofts)
Last edited by Petes on Wed Apr 11, 2012 8:50 pm, edited 1 time in total.
Re: McNamara single piece cross shaft - GROUP BUY
Maybe change the group buy to Ashcroft ?????
Jeff
Jeff
rover money pit on mogs !!!
Re: McNamara single piece cross shaft - GROUP BUY
i may be interested in a high capacity lt230 sump and a part time kit depending on price
Re: McNamara single piece cross shaft - GROUP BUY
I'd be keen on an Ashcroft unit Micka.
Re: McNamara single piece cross shaft - GROUP BUY
Keen on the ashcroft unit too. And an underdrive too unless anyone here wants to part with theirs..
CAPE CREW:
Search for it on Facebook
THANKS TO
RaceTech Steel
Aussie Tough Lights
Radio Industries Australia
Knobbys
Mrs alexcliffo @ Progressive Speech Pathology
Search for it on Facebook
THANKS TO
RaceTech Steel
Aussie Tough Lights
Radio Industries Australia
Knobbys
Mrs alexcliffo @ Progressive Speech Pathology
Re: McNamara single piece cross shaft - GROUP BUY
Not selling mine
Re: McNamara single piece cross shaft - GROUP BUY
Thats a bummer because I would save $60000milliontrillion dollars on freight and import taxPetes wrote:Not selling mine
Let me know if you change your mind
CAPE CREW:
Search for it on Facebook
THANKS TO
RaceTech Steel
Aussie Tough Lights
Radio Industries Australia
Knobbys
Mrs alexcliffo @ Progressive Speech Pathology
Search for it on Facebook
THANKS TO
RaceTech Steel
Aussie Tough Lights
Radio Industries Australia
Knobbys
Mrs alexcliffo @ Progressive Speech Pathology
Who is online
Users browsing this forum: No registered users and 0 guests