Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
308 no spark!
Moderators: toaddog, Elmo, DUDELUX
308 no spark!
I have just replaced the ignition coil after wiring the old one with polarities reversed (dickhead) and fixed it all up and still no spark! I have ign 12v to the pos pole on the coil, and the neg pole is earthed out through the dizzy. I have pulled the coil lead to try and see if there is a spark coming frm there but nothing... Does anyone know what could be happenIng?
Re: 308 no spark!
if its got points check your gap.if its electronic check your module.
Re: 308 no spark!
Baja Burley wrote:I have just replaced the ignition coil after wiring the old one with polarities reversed (dickhead) and fixed it all up and still no spark! I have ign 12v to the pos pole on the coil, and the neg pole is earthed out through the dizzy. I have pulled the coil lead to try and see if there is a spark coming frm there but nothing... Does anyone know what could be happenIng?
You mean through the points yes?
Make sure you have the right ignition feed to the coil. A simple check is to hot wire coil positive direct to the battery and see if you get spark. If you do then the ignition feed you are using is not active when the ignition switch is in the start position, only in the run position.
Who is online
Users browsing this forum: No registered users and 0 guests