Hi everyone, i have a petrol 6 cylinder 100 series and if you rest your foot on clutch pedal it will slowly go towards the floor and if you hold clutch in at lights etc you end up with next to no clutch but let clutch out and you have full clutch again, no oil loss or leaks, any ideas
Thanks
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
100 series clutch problem
Moderators: toaddog, Elmo, DUDELUX
Re: 100 series clutch problem
sounds the clutch master is leaking internally. by passing.
check the firewall on the inside for fluid. thats where the leaks show up.
check the firewall on the inside for fluid. thats where the leaks show up.
Re: 100 series clutch problem
popeyehj60 wrote:sounds the clutch master is leaking internally. by passing.
check the firewall on the inside for fluid. thats where the leaks show up.
Its not loosing any fluid at all, not a drop
Re: 100 series clutch problem
replace the master cylinder and slave cylinder. it'll be the master leaking fluid internally back past the piston seal
But as the master is worn so will the slave.
But as the master is worn so will the slave.
Who is online
Users browsing this forum: No registered users and 36 guests