Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

placemant of pyro probe?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 30
Joined: Tue May 29, 2012 9:11 pm

placemant of pyro probe?

Post by bhundi »

Hey guys just wondering where is the best position for placing the pyro probe,(as in before the turbo or after the turbo). many thanks in advance.
Top
Posts: 51
Joined: Wed Jun 01, 2011 2:52 pm
Location: gladstone

Re: placemant of pyro probe?

Post by bally »

most people go post turbo in the dump pipe for ease.....
Top
Posts: 411
Joined: Tue Feb 24, 2009 11:00 am
Location: Katherine N.T

Re: placemant of pyro probe?

Post by gu town »

X2

The closer to the pistons, the more accurate it will be.

On that note if I was to place the probe in cylinder 1 or 6 exhaust outlet (as they will be the hottest on a std setup) what max temp would I be looking for?
GU td42 ute with go fast bits and go futher bits
Top
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Re: placemant of pyro probe?

Post by hulsty »

Pre turbo, IMO post turbo is a waste of time and money and gives little to no value.
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Top
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Re: placemant of pyro probe?

Post by Skegbudley »

hulsty wrote:Pre turbo, IMO post turbo is a waste of time and money and gives little to no value.
Mabee if you have a 4.2.
It works well after the turbo on a ZD30. Beats sticking your head in a hole in the ground.
GU Patrol with go better bits added
Top
Posts: 1113
Joined: Tue Oct 07, 2003 1:20 pm
Location: QLD

Re: placemant of pyro probe?

Post by Skegbudley »

50mm past the turbo flange works fine.
GU Patrol with go better bits added
Top
Posts: 30
Joined: Tue May 29, 2012 9:11 pm

Re: placemant of pyro probe?

Post by bhundi »

thanks for the reply everyone.sounds like pre turbo is the go.There is a grub screw there allready.just got to get it out.seems very tight.
Top
Posts: 64
Joined: Wed Jun 15, 2011 6:27 pm

Re: placemant of pyro probe?

Post by TURBO LS2 »

Soak it in moretein fly spray...Trust me a ship builder showed me.
Top
Posts: 30
Joined: Tue May 29, 2012 9:11 pm

Re: placemant of pyro probe?

Post by bhundi »

cheers turbo ls2 i will give it a go.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 116 guests