Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Need an experienced Atlas rebuilder

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

Need an experienced Atlas rebuilder

Post by rockcrawler31 »

I have an atlas here that is running 5.0 gears and i'm changing it over to 3.8's. Does anyone know of a transmission builder in the Sydney area who knows what they're doing with Atlas's?

I need to be perfectly clear, not just recommendations for a trans shop, but people who are known to have built these things PROPERLY and to AA specs?

I have the AA teardown and rebuild manual here with all the specs but i'd still rather have it done by someone who knows the tricks and pitfalls of these things.

M
http://www.populationparty.org.au/
Posts: 1918
Joined: Fri Aug 26, 2005 4:28 pm
Location: Melbourne

Re: Need an experienced Atlas rebuilder

Post by GUtripper »

Not much help perhaps but I would suggest at least 2 places in Melb probably with experience in them.
My friends aren't holding me back..... I'm pulling 'em forward.
Posts: 1321
Joined: Tue Aug 03, 2004 7:56 pm
Location: Jamisiontown NSW

Re: Need an experienced Atlas rebuilder

Post by MARKx4 »

Could try jmac at arndell park, its just a out loud thought.

Mark.
Its not cool, unless it's got boost :)
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

Re: Need an experienced Atlas rebuilder

Post by rockcrawler31 »

thanks guys

sam from Overkill has very kindly offered to help me out.

MILO
http://www.populationparty.org.au/
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 0 guests