Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Diff gears for 35's on 80 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 165
Joined: Thu Oct 30, 2008 6:40 pm
Location: deception bay, QLD

Diff gears for 35's on 80 series

Post by builtlux88 »

Hey guy I'm running 315's on my 1994 80 series now and want to upgrade the diff gears ratio do people recommend I go with and so far I was just gonna go with nitro from locktup4x4 and any ideas on rev comparisons would be appreciated
1n106 coil'd, 39.5 iroks, locked, bobbed, tubbed, dovetaild, highsteer and heavy right(UNDER CONSTRUCTION)
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: Diff gears for 35's on 80 series

Post by 80's_delirious »

What do you want to achieve? Do want the equivalent to factory gearing? Or looking for lower gearing?
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Posts: 41
Joined: Sun Jun 14, 2009 12:36 pm
Location: BUNDY

Re: Diff gears for 35's on 80 series

Post by mickdirt »

I'm running 4.3's from a 105, had to use a 100 series arb rear locker and 80 star gears to fit axles but works well, :cool:
Posts: 165
Joined: Thu Oct 30, 2008 6:40 pm
Location: deception bay, QLD

Re: Diff gears for 35's on 80 series

Post by builtlux88 »

I was wanting to make it a little bit lower then what it would be with 31s
1n106 coil'd, 39.5 iroks, locked, bobbed, tubbed, dovetaild, highsteer and heavy right(UNDER CONSTRUCTION)
Posts: 1105
Joined: Wed Jan 23, 2008 8:56 pm
Location: central coast down under

Re: Diff gears for 35's on 80 series

Post by stilivn »

builtlux88 wrote:I was wanting to make it a little bit lower then what it would be with 31s
Then it would be revving its tit off on the freeway. Most people opt for a little higher due to this. Is the car in question a daily driver or a trailer queen?
1993 80 series, 4" tough dog adjustable bb lift kit, LPG, 35" MTR'S
brooksy wrote:Branden Tagg.....He is the King of all f@rkups & a Gimps bitch after hours
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Re: Diff gears for 35's on 80 series

Post by hulsty »

Transfer case gears could be a better option ?
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Posts: 2186
Joined: Wed Oct 01, 2003 9:11 pm
Location: Melbourne, now with 1HDFTi power!

Re: Diff gears for 35's on 80 series

Post by +dj_hansen+ »

4.56s would get you back to factory (34.5/31.5)*4.11=4.50. You could run 4.88s but as suggested you would suffer on the highway.
Cheers,
Dan.

[i]1996 HDJ80R[/i]
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: Diff gears for 35's on 80 series

Post by 80's_delirious »

hulsty wrote:Transfer case gears could be a better option ?

Agreed. Locktup have 25% reduction gears from Marlin crawler for $1100.
Or diff gears are about $430 per set.
I found the standard gearing in my 80series ok onroad with 315s.

315s change gearing by about 10%, so reduction gears will still give a lower crawl ratio.

The lower you go with diff ratios, the weaker the diff gears are also.
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Posts: 165
Joined: Thu Oct 30, 2008 6:40 pm
Location: deception bay, QLD

Re: Diff gears for 35's on 80 series

Post by builtlux88 »

Yea the car is only a wk end car mainly used for 4wd and towing my 14 ft van and with the van on its. Just stupidly sluggy it's going to be turbod in next few wks but was still wanting lower gearing any how to lower it closer to standed for off road use
1n106 coil'd, 39.5 iroks, locked, bobbed, tubbed, dovetaild, highsteer and heavy right(UNDER CONSTRUCTION)
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: Diff gears for 35's on 80 series

Post by 80's_delirious »

builtlux88 wrote:Yea the car is only a wk end car mainly used for 4wd and towing my 14 ft van and with the van on its. Just stupidly sluggy it's going to be turbod in next few wks but was still wanting lower gearing any how to lower it closer to standed for off road use
A couple of times when towing, I have taken off on hills in lowrange, get moving, get past the hill, then shift into high while on the fly.
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Re: Diff gears for 35's on 80 series

Post by hulsty »

Wait till you turbo it before deciding. I run 35''s and 4.11 gears in my BJ74, standard high range but lower low range gears, its great, lowish RPM at 100km/h, still heaps of power and low range is good, just it tops out at about 60km/h in low.
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Posts: 156
Joined: Wed Nov 26, 2008 11:10 pm
Location: Gold Coast

Re: Diff gears for 35's on 80 series

Post by MJ80 »

I have 35s on my 80 with std gearing, its good on road i actually prefer it to the lower gearing personally, but off road its a real bitch, just cant go slow enough.
TD 80 Series - Custom barwork, E locked, 35" MTR's, Lifted, Fox Shocks. Good times.
Posts: 1846
Joined: Fri Oct 31, 2008 2:18 pm
Location: Brisbane

Re: Diff gears for 35's on 80 series

Post by SCANAS »

I was going to suggest transfer gears too. They must have come down I thought there where $1850 parts only last time I checked $1100 seems reasonable to me.
I'm not quitting drinking, I'm retiring at the top of my game - sporting comeback likely.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests