Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

pitman/gear puller

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 1285
Joined: Thu Jan 15, 2004 8:22 pm
Location: gold coast

pitman/gear puller

Post by uninformed »

hey all,

what brand of pullers are guys using on pitman arms etc. Has to be a 2 jaw type. Has to be heavy duty. Happy to buy something decent.

also why do I have to log in every 3 visits????

cheers
Serg
Top
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

Re: pitman/gear puller

Post by Nelso »

I don't use a puller. A 4lb lump hammer and a small crow bar works fine.
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Top
Posts: 219
Joined: Mon Jul 11, 2011 7:48 pm
Location: Newcastle

Re: pitman/gear puller

Post by SierraDan »

x2 hammer some sort of lever and/or a dolly.
Top
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: pitman/gear puller

Post by 80's_delirious »

Yeah, I'm not a fan of smashing shit out of critical steering components, a puller and a small crack with a hammer to jar it free is the way to go. Just don't buy cheap shit, I broke a cheesy on my 80series.
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Top
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Re: pitman/gear puller

Post by Mr DJ »

I use a 3 jaw puller from supercrap and a big hammer, torque up & belt a few times, repeat till it comes off and always does ...
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Top
Posts: 297
Joined: Thu Jan 20, 2011 1:48 pm

Re: pitman/gear puller

Post by 91Mav »

The $40 pitman arm puller from supercheap will do the trick. Do it up tight the hit the bolt with a hammer, re-tighten, hit etc.

I used my 8t hydraulic puller and it struggled til I heated the arm. A bearing seperator and press would work too.
Top
Posts: 1231
Joined: Sun May 15, 2005 1:00 pm
Location: Bayside, Brisbane

Re: pitman/gear puller

Post by Mr DJ »

I ONLY hit the pittmen arm near the spline to shock load it loose, never the bolt/nut.
91' Hilux Surf with the usual mods & a few different ones ....
Coil SAS by www.budscustoms.com.au
Top
Posts: 1047
Joined: Sun Nov 19, 2006 2:27 pm
Location: Wollongong

Re: pitman/gear puller

Post by Nelso »

Mr DJ wrote:I ONLY hit the pittmen arm near the spline to shock load it loose, never the bolt/nut.
+1
What's the difference between ignorance and apathy? I don't know and I don't care.

I am an insomniac dyslexic agnostic. I often lay awake all night wondering if there really is a Dog.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 130 guests