Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

H260 diff - land anchor?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 297
Joined: Thu Jan 20, 2011 1:48 pm

H260 diff - land anchor?

Post by 91Mav »

G'day fellas,

I'm planning on running a Patrol rear diff on my Hilux and was wondering how the H260's compare with H233's for ground clearance? I'm hoping the housing can be shaved close to the 13.5mm extra radius of the larger centre? Are the housing's the same width?

Thanks,
Josh
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Re: H260 diff - land anchor?

Post by WICKED »

Look in memebers for my mq, good shave pics in there. I run a GQ H260

Depends why H260 you get for width.
GQ H260 are about 4" narrower than the coil H233. Only leaf and only drum brakes.
GU H260 is wider but still narrower than the GU H260 coil diff in the wagons. Both leaf and coil, both drum and disc brakes.
GU coil wagon H260 are shaved a little from factory but GQ are a higher spline count.

MQ H260s are crap. To narrow and have brital axles and pinions. Or so I'm told.
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Re: H260 diff - land anchor?

Post by WICKED »

Not the best pic but you get an idea.

Image
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 3739
Joined: Sat Dec 11, 2004 10:10 pm

Re: H260 diff - land anchor?

Post by mickyd555 »

in the 4 years i had one in my truck i dont remember once getting out and seeing that i was stuck on my rear diff. I didnt use it for rockcrawling though so it really depends on what the purpose of your patrol is?
Posts: 1
Joined: Sun Jul 24, 2011 3:08 pm

Re: H260 diff - land anchor?

Post by benmudlover »

i got a h260in the rear of my gu wagon the pumpkin is massive and yes even running 35s it does get hung up mainly deep ruts if not hung up ive digged a nice trench for the next bloke but in saying that the h260 is a 10.25 inch diff now thats bullet proof and ive heard reports of them being shaved up to 18 and 22 mm one bloke on here said his shaved h260 has more clearance than a h233 so in saying h260 and a shave and u be laughing
Posts: 64
Joined: Wed Jun 15, 2011 6:27 pm

Re: H260 diff - land anchor?

Post by TURBO LS2 »

WICKED wrote:Look in memebers for my mq, good shave pics in there. I run a GQ H260

Depends why H260 you get for width.
GQ H260 are about 4" narrower than the coil H233. Only leaf and only drum brakes.
GU H260 is wider but still narrower than the GU H260 coil diff in the wagons. Both leaf and coil, both drum and disc brakes.
GU coil wagon H260 are shaved a little from factory but GQ are a higher spline count.

MQ H260s are crap. To narrow and have brital axles and pinions. Or so I'm told.

GU coil H260's are 37 spline semi floating axles and the leaf H260's are 35 spline full floating axles.
Posts: 1676
Joined: Tue Oct 22, 2002 9:26 am
Location: brisbane

Re: H260 diff - land anchor?

Post by 1MadEngineer »

TURBO LS2 wrote: leaf H260's are 35 spline full floating axles.
no 34
WWW.TEAMDGR.COM
WWW.SUPERIORENGINEERING.COM.AU
WWW.LOCKTUP4X4.COM.AU
Posts: 12
Joined: Wed Jan 13, 2010 5:47 pm
Location: newcastle

Re: H260 diff - land anchor?

Post by reaper01 »

i hate the h260. had one in my gu wagon on 37s and it still dragged everywhere. their not any stronger then the standard size hg33
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Re: H260 diff - land anchor?

Post by WICKED »

reaper01 wrote:i hate the h260. had one in my gu wagon on 37s and it still dragged everywhere. their not any stronger then the standard size hg33
Same pinion but everything else is stronger.

I broke 4 H233 axles and tht broke 4 centers on 37s. Ive had my H260 rear for like 4 years I think and have only broke one pinion ( had hit a hill to hard and lifte the whole car and landed 3rd gear full noise, broke both CBS too) and that's is with 40s
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 64
Joined: Wed Jun 15, 2011 6:27 pm

Re: H260 diff - land anchor?

Post by TURBO LS2 »

1MadEngineer wrote:
TURBO LS2 wrote: leaf H260's are 35 spline full floating axles.
no 34

I stand corrected.
Posts: 64
Joined: Wed Jun 15, 2011 6:27 pm

Re: H260 diff - land anchor?

Post by TURBO LS2 »

WICKED wrote:
reaper01 wrote:i hate the h260. had one in my gu wagon on 37s and it still dragged everywhere. their not any stronger then the standard size hg33
Same pinion but everything else is stronger.

I broke 4 H233 axles and tht broke 4 centers on 37s. Ive had my H260 rear for like 4 years I think and have only broke one pinion ( had hit a hill to hard and lifte the whole car and landed 3rd gear full noise, broke both CBS too) and that's is with 40s

How did u comunicate with your navi with 2 broken CB's???
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Re: H260 diff - land anchor?

Post by WICKED »

TURBO LS2 wrote:
WICKED wrote:
reaper01 wrote:i hate the h260. had one in my gu wagon on 37s and it still dragged everywhere. their not any stronger then the standard size hg33
Same pinion but everything else is stronger.

I broke 4 H233 axles and tht broke 4 centers on 37s. Ive had my H260 rear for like 4 years I think and have only broke one pinion ( had hit a hill to hard and lifte the whole car and landed 3rd gear full noise, broke both CBS too) and that's is with 40s

How did u comunicate with your navi with 2 broken CB's???

Screamed :)
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Re: H260 diff - land anchor?

Post by WICKED »

I'm chasing a H260 4.6 if any one has or knows of one.
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 1345
Joined: Wed Jul 18, 2007 7:15 pm
Location: Jimboomba

Re: H260 diff - land anchor?

Post by SIM79 »

WICKED wrote:I'm chasing a H260 4.6 if any one has or knows of one.
Marks sell them or you can get them off nissan they as were in Nissan Atleon trucks

http://www.marks4wd.com/products/diff_g ... nissan.htm" onclick="window.open(this.href);return false;
Nitto Mud Grapplers, Lockrite, 4.3s, Trail Ready BL, PTO, High pinion rear,Gu diff with Buds Customs armour and heaps of Superior gear, 24% Reduction .
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Re: H260 diff - land anchor?

Post by WICKED »

SIM79 wrote:
WICKED wrote:I'm chasing a H260 4.6 if any one has or knows of one.
Marks sell them or you can get them off nissan they as were in Nissan Atleon trucks

http://www.marks4wd.com/products/diff_g ... nissan.htm" onclick="window.open(this.href);return false;

I hate too say this but snake are cheaper. And at $1500+ id rather buy an atlas.

I'm only after a second hand one sim.
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Posts: 1345
Joined: Wed Jul 18, 2007 7:15 pm
Location: Jimboomba

Re: H260 diff - land anchor?

Post by SIM79 »

WICKED wrote: And at $1500+ id rather buy an atlas.

I'm only after a second hand one sim.
The new price at Marks is $950, not $1500
Nitto Mud Grapplers, Lockrite, 4.3s, Trail Ready BL, PTO, High pinion rear,Gu diff with Buds Customs armour and heaps of Superior gear, 24% Reduction .
Posts: 5462
Joined: Fri Dec 20, 2002 1:29 pm
Location: Boomba

Re: H260 diff - land anchor?

Post by WICKED »

SIM79 wrote:
WICKED wrote: And at $1500+ id rather buy an atlas.

I'm only after a second hand one sim.
The new price at Marks is $950, not $1500

Snake had em for $720 each. So $1440 + bearings etc
Buds Customs : Street, Track & Trail - Parts & Fabrication - Nissan, Toyota, Custom D60 gear
http://www.facebook.com/budscustoms
Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests