Gu pulling to left after hub rebuild.

[blackmav]

We did a swivel hub rebuild on my mates 2000 Gu wagon,
bearings ,seals, king pin bearings, everything. Now its pulling to the left, just enough to have to hold onto it all the time.
Theres no excessive heat in the hubs after driving and the wheels turn fine.
Brakes dont pull to one side.
Tyre pressures ok.
He has a steering dampener so he is going to make sure thats not notchy but its got me stuck? Its just a dampener not one with a spring one it so I dont think that could be doing it.

Cheers

[stool]

Is the right side axle seal leaking oil on the disk

[blackmav]

nup. Steering wheel out, its like the drag link is out but its non adjustable.

[ST391GQ]

I have had the LHS bearings come loose after servicing on 2 occasions now...and it pulled slightly left. Just nipped them up a poofteenth and they were right then...and still are.
My theory is the left ones will come loose because of rotation direction just slightly ....and hub tips that small amount n disc rubs on pads just a tad more.. Dunno why this happens really tho...and just my thorts.
Worth checkin out tho.

Cheers Keith

[hokey]

something to do with auto hubs perhaps?

[blackmav]

He tightened the wheel bearings up on fri, probably 1/4 turn. Still much the same.
I havnt put eyes on it yet but probably will this week.
He took it for an alignment and the guy said he ran out of adjustment..So untill I see it I dont know.

I dont think it would be hubs/brakes as its not generating any heat

[GUtripper]

Do the front Tyres appear worn the same?

[gu town]

Do the front Tyres appear worn the same?

x2

nissans seem to wear the front left tyre funny.

try a tyre rotation.

[tmw_85]

Hi, do you still have the old swivel pin bearing cones? They might of been offset. Cheers