Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Chain to gear drive adaptor plates
Moderators: toaddog, Elmo, DUDELUX
Chain to gear drive adaptor plates
Hey guys, can any one confirm 100% if The adaptor plates for the r series gearbox to go from chain drive to gear drive are the same on a g series to adapt from chain drive to gear drive?
My gearbox is from a 2004 ln167, I was going to change to older g52 with gear drive just because it's cheaper but working out what's best to do since I have a gear drive 21 spline transfer with 4.1 gears in the shed..
Going to be going 37's soon so think I'll need the crawler gears..
Cheers brad
My gearbox is from a 2004 ln167, I was going to change to older g52 with gear drive just because it's cheaper but working out what's best to do since I have a gear drive 21 spline transfer with 4.1 gears in the shed..
Going to be going 37's soon so think I'll need the crawler gears..
Cheers brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Re: Chain to gear drive adaptor plates
brad 93hilux wrote:Hey guys, can any one confirm 100% if The adaptor plates for the r series gearbox to go from chain drive to gear drive are the same on a g series to adapt from chain drive to gear drive?
My gearbox is from a 2004 ln167, I was going to change to older g52 with gear drive just because it's cheaper but working out what's best to do since I have a gear drive 21 spline transfer with 4.1 gears in the shed..
Going to be going 37's soon so think I'll need the crawler gears..
Cheers brad
Brad
Ring Tash at locktup, she will be able to tell you first hand... I would say Yes but just confirm with her...
Matt
Hell Raiser 4 seat social buggy..
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Thanks to RDG Engineering, OverKill Engineering, Locktup 4x4 and C&D Automotive
Re: Chain to gear drive adaptor plates
Yeh that's what I wanted to do but have been calling all week with no one answering, left a message and no call back..
That's why I thought I'd ask the question..
But if not hopefully they are open next week..
Cheers
That's why I thought I'd ask the question..
But if not hopefully they are open next week..
Cheers
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Re: Chain to gear drive adaptor plates
Keep the R series box and adapt a gear driven case to it, locktup will help ya out funny that no ones answering.
plenty of parts on the bench
Re: Chain to gear drive adaptor plates
Hey Brad, not sure why you couldn't get through...
Your G52 will have a 26 spline output so won't work with a 23 spline chain to gear kit.
Your G52 will have a 26 spline output so won't work with a 23 spline chain to gear kit.
www.locktup4x4.com.au
Re: Chain to gear drive adaptor plates
Thanks chris, yeh tried all week at different times but would ring out n go to message bank.
Well at least it makes it easier to decide, might change to different g52 for now so I can use my transfer with the crawler gears and then when I have more money go r series with adaptors and 23 spline gears etc.etc.
Thanks for the reply's
Brad
Well at least it makes it easier to decide, might change to different g52 for now so I can use my transfer with the crawler gears and then when I have more money go r series with adaptors and 23 spline gears etc.etc.
Thanks for the reply's
Brad
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Re: Chain to gear drive adaptor plates
Did you allow for a time difference of 2hrs?
Its not cool, unless it's got boost :)
Re: Chain to gear drive adaptor plates
Yeh I did, I lived in wa for 3 years so I'm used to thinking bout that, was calling around 10.30am and few times around 3pm Wa time.
Got the voice message of tash to leave message.
All good, not in a rush anyway will try again Monday..
Cheers
Got the voice message of tash to leave message.
All good, not in a rush anyway will try again Monday..
Cheers
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Re: Chain to gear drive adaptor plates
http://www.Lowrangeoffroad.com" onclick="window.open(this.href);return false; would sell them too. Have a squiz
I am Tim
Who is online
Users browsing this forum: No registered users and 7 guests