Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
4wd builder and mech
Moderators: toaddog, TWISTY, V8Patrol, Moderators
4wd builder and mech
dose anyone know any good builders and mech in NSW and websits i can check out
Re: 4wd builder and mech
Where in NSW and what are you wanting to build?
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346j-top paj wrote:gayer than jizz on a beard
Re: 4wd builder and mech
live axile swap on a 200 seires with big lift lockers 35 or 37 u know that kind of stuff
Re: 4wd builder and mech
Think you might find it can't be done legally, I would talk to an engineer first.
1993 80 series, 4" tough dog adjustable bb lift kit, LPG, 35" MTR'S
brooksy wrote:Branden Tagg.....He is the King of all f@rkups & a Gimps bitch after hours
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho
Re: 4wd builder and mech
While the original poster sounds like he hasn't put much thought into it and might own a flat brimmed cap, i don't necessarily think it's out of the question for a SAS on a 200. People said the same thing about the new hilux's when they came out and said that EFI would be the end of people working on cars and engines at home alla way back in 1990.stilivn wrote:Think you might find it can't be done legally, I would talk to an engineer first.
Certainly a lot of work and the "37's and big lift" thing is possibly a bit of a Gomer Pyle question.
http://www.populationparty.org.au/
Im here for the sausage!
Re: 4wd builder and mech
you may get a diff swap but 37s i wouldnt think so anymore.
talk to an engineer first. because a good 4wd shop would just get the shits with a tyre kicker.
and a ripoff one will just take your cash and not deliver on this request.
talk to an engineer first. because a good 4wd shop would just get the shits with a tyre kicker.
and a ripoff one will just take your cash and not deliver on this request.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
www.lovells.com.au
RAW4x4
Re: 4wd builder and mech
Edited {Inside joke or not, he is not going to be promoted here. ferog.}
Bravery isnt saving someone from a burning house. Real bravery is tempting a fart when you have diarrhea.
ROCKHAMPTON LOCAL LEGEND
http://www.youtube.com/watch?v=Vy2hVtJv8tw
ROCKHAMPTON LOCAL LEGEND
http://www.youtube.com/watch?v=Vy2hVtJv8tw
Re: 4wd builder and mech
thanks guy and yes i will go through an engerneer but dose anyone kno one?
sorry this will be my first big project so i need the help working it all out.
sorry this will be my first big project so i need the help working it all out.
Re: 4wd builder and mech
Like I said above. It would help if you said what area of NSW you were so we can direct you to the right place.
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346j-top paj wrote:gayer than jizz on a beard
Re: 4wd builder and mech
baulkham hills mate sydney.
Van-tastic!
Posts: 6107
Joined: Tue Apr 10, 2007 5:22 pm
Joined: Tue Apr 10, 2007 5:22 pm
Location: .."I MIGHT NOT AGREE WITH WHAT YOU SAY, BUT ILL DEFEND YOUR RIGHT TO SAY IT".
Re: 4wd builder and mech
Ring athol mullen in Newcastle,he will tell you if you can do it.Before you waste your money
24 Newcastle St
Cardiff, New South Wales, Australia 2285
.Phone (02) 4956 8030
Email athol@idl.net.au
24 Newcastle St
Cardiff, New South Wales, Australia 2285
.Phone (02) 4956 8030
Email athol@idl.net.au
slugs are just snails that sold their belongings for drug money
Dream as if you'll live forever, live like you'll die today.
Powered by Pals, Motivated by Mates.
Dream as if you'll live forever, live like you'll die today.
Powered by Pals, Motivated by Mates.
Re: 4wd builder and mech
He will say no. There is another guy in Sydney, will see if I can find his card. In mean time try rta website for list of engineer's.boner59 wrote:Ring athol mullen in Newcastle,he will tell you if you can do it.Before you waste your money
24 Newcastle St
Cardiff, New South Wales, Australia 2285
.Phone (02) 4956 8030
Email athol@idl.net.au
1993 80 series, 4" tough dog adjustable bb lift kit, LPG, 35" MTR'S
brooksy wrote:Branden Tagg.....He is the King of all f@rkups & a Gimps bitch after hours
Re: 4wd builder and mech
ok it looking more and more likly it wont work with out a shit load of cash so wat bout a hilux with the axile swap with the 4.5 v8 deisel thourght?
Re: 4wd builder and mech
It will cost a bit of money. Mods are like that. haha. But like said. There is a list on the RTA website that you check for engineers. Give them a call and have a chat with them to find out just what is involved so you can figure out just what the cost will be. Then you can call around a few shops to let them know what you want and they can talk you through the process from there.
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346j-top paj wrote:gayer than jizz on a beard
Re: 4wd builder and mech
And the other question is: Why? Is it just to have something different, or do you have a specific task in mind, that a std vehicle won't do. It sounds like you are intending to buy a new vehicle, then heavily modify it, and i'm sort of getting the feeling that the answer to "Why?" is "just 'cos".
My name is Rob.
His name is Robert Paulson. His name is Robert Paulson. His name is Robert Paulson. His name is Robert Paulson.
This is legal advice.
His name is Robert Paulson. His name is Robert Paulson. His name is Robert Paulson. His name is Robert Paulson.
This is legal advice.
Re: 4wd builder and mech
X2 dealt with Athol recently on a simple engineering mod and he was so shit scared of mooted changes to rules, he was incapable of providing clarity on a simple seat belt installstilivn wrote:He will say no. There is another guy in Sydney, will see if I can find his card. In mean time try rta website for list of engineer's.boner59 wrote:Ring athol mullen in Newcastle,he will tell you if you can do it.Before you waste your money
24 Newcastle St
Cardiff, New South Wales, Australia 2285
.Phone (02) 4956 8030
Email athol@idl.net.au
Can't see him even considering what the OP is suggesting.
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Re: 4wd builder and mech
I would also ask 'why'?
Where are you intending to take it? Standard 200series would take you through almost any of the well known 4wd tourist routes,ie Cape York, Simpson Desert, Tanami, Gibb River etc
If you are going places that 'need' big lift and 37s be prepared for panel damage etc
Where are you intending to take it? Standard 200series would take you through almost any of the well known 4wd tourist routes,ie Cape York, Simpson Desert, Tanami, Gibb River etc
If you are going places that 'need' big lift and 37s be prepared for panel damage etc
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Re: 4wd builder and mech
for something different iv always wanted that truck thats different to everything else. somthing i can b proude to say is mine and i built it lik i would lik to do as much as i can myself
Re: 4wd builder and mech
A lot of car builders are also having problems with him. Seems like he has jumped the fence on vehicle mods and would rather not be in the game.80's_delirious wrote:X2 dealt with Athol recently on a simple engineering mod and he was so shit scared of mooted changes to rules, he was incapable of providing clarity on a simple seat belt installstilivn wrote:He will say no. There is another guy in Sydney, will see if I can find his card. In mean time try rta website for list of engineer's.boner59 wrote:Ring athol mullen in Newcastle,he will tell you if you can do it.Before you waste your money
24 Newcastle St
Cardiff, New South Wales, Australia 2285
.Phone (02) 4956 8030
Email athol@idl.net.au
Can't see him even considering what the OP is suggesting.
1993 80 series, 4" tough dog adjustable bb lift kit, LPG, 35" MTR'S
brooksy wrote:Branden Tagg.....He is the King of all f@rkups & a Gimps bitch after hours
Re: 4wd builder and mech
You'd know about that! haha80's_delirious wrote: If you are going places that 'need' big lift and 37s be prepared for panel damage etc
Old and rolled: 94 lux, 37's, air lockers f/r, high steer, ruf, ifs rears, widetracked, longs, duals
New: 90 4runner 80 series diffs, air lockers f/r, LS1, reduction gears, 35's, engineered
New: 90 4runner 80 series diffs, air lockers f/r, LS1, reduction gears, 35's, engineered
Re: 4wd builder and mech
Yep :-( learnt that by going places that 'need' 37s and big lift with only 35s and 2" lift and not enough brains to know the difference94lux wrote:You'd know about that! haha80's_delirious wrote: If you are going places that 'need' big lift and 37s be prepared for panel damage etc
RN wrote:pussy is out, its the log for me... Thank you Jesus.
God of Magnificant Ideas!
Re: 4wd builder and mech
thread cleaned
thread moved
Kingy
thread moved
Kingy
[color=blue][size=150][b]And your cry-baby, whinyassed opinion would be.....? [/b][/size][/color]
Re: 4wd builder and mech
sorry should of watched wat i said
Re: 4wd builder and mech
This is outers.
Welcome to the jungle
Welcome to the jungle
Bravery isnt saving someone from a burning house. Real bravery is tempting a fart when you have diarrhea.
ROCKHAMPTON LOCAL LEGEND
http://www.youtube.com/watch?v=Vy2hVtJv8tw
ROCKHAMPTON LOCAL LEGEND
http://www.youtube.com/watch?v=Vy2hVtJv8tw
Re: 4wd builder and mech
Don't stress it Cam. You'll get used to it and eventually you'll be wearing teal slacks and talking about blue shackles and how they help you push through the first layer of gravity. haha. OH. just don't mention the 'G' word unless you've been around for a long time. For the newbies. The 'G' word refers to Goats. Midgets are PC enough for here but don't talk about Goats and if you want a bit of fun rattle Milo's (rockcrawler31) cage a little. Good sport for everyone.
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346j-top paj wrote:gayer than jizz on a beard
Re: 4wd builder and mech
When thread is in chitchat, more off-topic stuff is tolerated. Seems there was enough tech to warrant a move, but that made the chat out of place?
My name is Rob.
His name is Robert Paulson. His name is Robert Paulson. His name is Robert Paulson. His name is Robert Paulson.
This is legal advice.
His name is Robert Paulson. His name is Robert Paulson. His name is Robert Paulson. His name is Robert Paulson.
This is legal advice.
Re: 4wd builder and mech
For starters i would be working out exactly what you want before even thinking about calling engineers, they would ge tthe shites with radoms ringing up but not having worked out what they want - I know I would anyway.
If you are in sydney there are a few engineers - I think I spoke to consumotive or something like that - htere is a list of signatories on the rta website with contact details etc.
SAS I can't imagine would be much of a problem but I am building a car through Athol as he is local etc and He is only willing to certify tyres up to 50mm over max standard and up to 4inch total lift without having to higher racetracks and do brake tests. However I am also doing a body swap and engine swap all of which is fine. You just have to do some research and work out the best way to get what you want to acheieve.
For 4x4 fabrication/modification stuff I have heard great things about lukeys 4x4 in syd
Cheers
James
If you are in sydney there are a few engineers - I think I spoke to consumotive or something like that - htere is a list of signatories on the rta website with contact details etc.
SAS I can't imagine would be much of a problem but I am building a car through Athol as he is local etc and He is only willing to certify tyres up to 50mm over max standard and up to 4inch total lift without having to higher racetracks and do brake tests. However I am also doing a body swap and engine swap all of which is fine. You just have to do some research and work out the best way to get what you want to acheieve.
For 4x4 fabrication/modification stuff I have heard great things about lukeys 4x4 in syd
Cheers
James
Posts: 689
Joined: Sat Oct 09, 2010 5:12 pm
Joined: Sat Oct 09, 2010 5:12 pm
Location: SMUGGLING COOOOOKIES ACROSS THE MEXICAN BORDER
Re: 4wd builder and mech
i was told athol never got reacredited?
friend ended up using a bloke in sydney, but athol was closer.
for him and me.
friend ended up using a bloke in sydney, but athol was closer.
for him and me.
AUSTRALIA
WORTH LOOKING AT WORTH LOOKING AFTER
WORTH LOOKING AT WORTH LOOKING AFTER
Re: 4wd builder and mech
Yeah. Athol was pretty degected by the whole engineering process between the RTA and State Government. He got his nose out of joint when he wasn't involved with the whole process so he only does a few small things for people that are genuine.
http://www.outerlimits4x4.com/viewtopic ... 6&t=231346j-top paj wrote:gayer than jizz on a beard
Who is online
Users browsing this forum: No registered users and 0 guests