Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

253 in a FJ40

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 11
Joined: Fri Oct 12, 2012 3:46 pm

253 in a FJ40

Post by funloven »

Im about to pick up a FJ40 with a petrol 4.2. It comes withh aholden 253. would this be a better set up as its the same size moter. I would like the sound of a V8 but just dont know if iys worth the effort?
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: 253 in a FJ40

Post by 80's_delirious »

I wouldn't bother with a 253, for all the effort and $$ you'd get better bang for your buck with an injected 5litre or chev V8.
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Posts: 41
Joined: Sun Sep 02, 2012 4:15 pm

Re: 253 in a FJ40

Post by Blackened »

304 or 308 over a 253 or try a lexus v8.
Posts: 1768
Joined: Sun Mar 14, 2004 11:51 am
Location: Weipa

Re: 253 in a FJ40

Post by crankycruiser »

dont waste your money on the 253. Sell it to a mate for a boat anchor and with the money u get from that u can buy a happy meal and be happy!
80 xtra cab
Supercharged LS1, Locked n shit

80 Wagon, TD Tourer, locked, Interco 35s, G turbo
Posts: 11
Joined: Fri Oct 12, 2012 3:46 pm

Re: 253 in a FJ40

Post by funloven »

Thanks thats what i thought. The conversion kit it comes with would fit a 308 i would assume?
Is the origanal toyota 4.2 as bad as every one tells me?
Would it be thirster than a V8?
Posts: 3740
Joined: Sat May 26, 2007 5:04 pm
Location: Licking a window near you

Re: 253 in a FJ40

Post by 80's_delirious »

funloven wrote:Thanks thats what i thought. The conversion kit it comes with would fit a 308 i would assume?
Is the origanal toyota 4.2 as bad as every one tells me?
Would it be thirster than a V8?
Conversion kit may or may not be any good. Some 308 had a chev bolt pattern for the bellhousing. All 253 and most 308 had trimatic bolt pattern.
RN wrote:pussy is out, its the log for me... Thank you Jesus.
Posts: 266
Joined: Fri Dec 28, 2007 10:59 am
Location: Sunshine Coast

Re: 253 in a FJ40

Post by Bearded1 »

crankycruiser wrote:dont waste your money on the 253. Sell it to a mate for a boat anchor and with the money u get from that u can buy a happy meal and be happy!
That's a bit harsh. many moons ago, in my teens, a bloke who was a mate and now works for Victor Bray as pit crew had an LX torana with a 253 that revved to 7500rpm. If the car didn't have head rests it would have snapped your neck. Conceded that it wouldn't suit a heavy car, so I would go bigger in a cruiser.
I'd rather be biologically honest, than politically correct.
Posts: 261
Joined: Sat Feb 20, 2010 11:41 pm
Location: Katherine NT

Re: 253 in a FJ40

Post by supazuk »

I had a 253 fj40 25 years ago. I had a 253 because there were no issues with rego like bigger motors. It had enough power that you could make the front tyres come of the ground when changing from 1st to 2nd. It had a great rev range and didn't seem to mind 7000rpm for long periods. It also ran the speedo off the gauge.

253's are a great little motor and for me it worked very well in my 40. Plus anything is better then a F motor.
Posts: 11
Joined: Fri Oct 12, 2012 3:46 pm

Re: 253 in a FJ40

Post by funloven »

Now use are trying to make my disision hard.
Is it safe to say that it would be better then thye toyota petral?
everything is there ready to bolt in aperantly so it wouldnt cost much to put it in.
Is a mod plate very expensive,dificult?
Posts: 318
Joined: Sun Jun 07, 2009 2:31 am
Location: Brisbane

Re: 253 in a FJ40

Post by loosecanon »

Nothing wrong with running the 253, they rev hard and are heaps of fun, my cooks 253 will drag my 5ltr off on the beach all day. Parts are cheap and easy to source. The conversion is really easy and should only take a day or so depending on your know how. Do you know what type of conversion kit you have as that may be we're you come unstuck
" You can't fix it if you don't break it "
Posts: 11
Joined: Fri Oct 12, 2012 3:46 pm

Re: 253 in a FJ40

Post by funloven »

Not sure yet. I pick it up on Friday so will know more then.
Posts: 2
Joined: Sat Nov 03, 2012 6:59 pm

Re: 253 in a FJ40

Post by spanners81 »

Do some research into power and torque curves, compare the two and decide where you're going to need your power? do you want to cruise at 120km's/h or climb a mountain? in saying that, diff ratios and tyre size are going to affect this aswell.
Posts: 11
Joined: Fri Oct 12, 2012 3:46 pm

Re: 253 in a FJ40

Post by funloven »

Well i got my 40 and love it. I havnt picked up the 253 and conversion kit yet will hopfully in the next couple of weeeks. As far as doing 120 in the forty! wITH STEERING AND BREAKS LIKE IT HAS ITS A FULL TIME JOB KEEPING IT ON THE ROAD AT 100.
Post Reply

Who is online

Users browsing this forum: No registered users and 50 guests