It's been covered here before but I can't seem to find any information that doesn't lead to a dead link.
I've picked up an alternator for an EF Falcon, the 110amp unit. I need to visit the wreckers to pick up the regulator plug to suit and also the charging wire and mounting bolts.
Is there anything else I need to get?
Has anyone else completed this upgrade? What is required as far as installation goes. Do I need to remove the radiator, or drill out any mounts?
A step by step process would be really appreciated, and I'll bet handy for any one else contemplating this upgrade.
Cheers,
Salty
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Falcon alternator upgrade for Vitara G16A
Re: Falcon alternator upgrade for Vitara G16A
Grow some balls.
That is all.
That is all.
Re: Falcon alternator upgrade for Vitara G16A
That's what I was after. I got a plug and wiring harness today from pick and payless. Was $5 for the harness and bottom bolt.
I removed the alternator mount today and drilled out the holes to accomodate the larger bolt. Tomorrow I have to grind a bit off the mount, about 2mm to fit the larger alternator.
Because this is for the Vitara the pulleys are fine as they're all ready multi v. I think I may have to get a bigger belt but I'll know when she goes in. Haven't had to remove the radiator yet either. But we'll see how tomorrow goes.
Cheers,
Salty.
I removed the alternator mount today and drilled out the holes to accomodate the larger bolt. Tomorrow I have to grind a bit off the mount, about 2mm to fit the larger alternator.
Because this is for the Vitara the pulleys are fine as they're all ready multi v. I think I may have to get a bigger belt but I'll know when she goes in. Haven't had to remove the radiator yet either. But we'll see how tomorrow goes.
Cheers,
Salty.
Re: Falcon alternator upgrade for Vitara G16A
i would run a in line fuse from alt to battery as well.
Re: Falcon alternator upgrade for Vitara G16A
Yep I used a resettable breaker
Suzuki Sierra, 6.5 twin sticked transfer,f&r 4.88 locked diffs, full exo, ute chop, bead locked 35 claws,winch,long travel shocks,stretched chassis.
Re: Falcon alternator upgrade for Vitara G16A
Get the main fusebox from the EF and use that as well.
You only live once, but live right and once is enough!
Who is online
Users browsing this forum: No registered users and 10 guests