I got some armada 3in travel hydro bump stops and mounting cans.
My current setup consists of std bumps, 3in lift, drop boxes (diff pushed forward 15-20mm) and 35's.
The 35's hit when I hit wash outs HARD at speed. but only just and rarely. tyre rubs on the std flare at 12 o'clock position. Probably the shocks topping out before the bumps do anything.
how have people mounted them?
Does the coil top hat need bracing?
The bumps seem really hard. Bashing them on my steel tray didnt budge anything but the steel it hit. Do they need to be softened from the standard pressure?
Will they be harsh at low speed?
Will the heavy GU ever fully compress these bumps?
Up close pics of the welded in can would be great.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
mounting hydro bumps..GU
mounting hydro bumps..GU
GU td42 ute with go fast bits and go futher bits
Re: mounting hydro bumps..GU
There is a bit of info on the Mudrhino forum in the suspension section,
it may be helpful???????????????
it may be helpful???????????????
Re: mounting hydro bumps..GU
thanks. You cant view it without signing in though.
GU td42 ute with go fast bits and go futher bits
Who is online
Users browsing this forum: No registered users and 109 guests