Was just wondering if anyone has an idea or spec sheet to tell me wat diff ratios I have in my 2001 79 series ute with a 1hz motor. And then which way I would have to go with ratios to run 35s as if they were the standard tire size 7.5x16 tire????
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
79 series diff ratios
Moderators: toaddog, Elmo, DUDELUX
79 series diff ratios
02 coil cab GU 5" lift twin locked custom tray 35s 4:6 diff ratios 3" straight through
Re: 79 series diff ratios
you will have 4.11, its on your engine bay ID plate.
I wouldn't bother changing ratios for 35s
I wouldn't bother changing ratios for 35s
Locktup4x4.com.au - For all of your hardcore gear
Outlaws4x4.com
Outlaws4x4.com
Re: 79 series diff ratios
ok thanks, would u consider transfer reductions for low range off road use?
02 coil cab GU 5" lift twin locked custom tray 35s 4:6 diff ratios 3" straight through
Re: 79 series diff ratios
Yes, locktup 4x4 sell low range gear sets for the Toyota split case .
Locktup4x4.com.au - For all of your hardcore gear
Outlaws4x4.com
Outlaws4x4.com
Re: 79 series diff ratios
Being a 1 hz the ratios should be 4:3 , the factory turbo is 4:11
Re: 79 series diff ratios
I don't think so Toby, 4.11 is standard across almost all Toyota pickups
Locktup4x4.com.au - For all of your hardcore gear
Outlaws4x4.com
Outlaws4x4.com
Re: 79 series diff ratios
Didn't only the 100 series come out with 4.3 ratio?
www.energizedracing.com
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Re: 79 series diff ratios
79x with a 1hz will have diff ratios of 4:3
79x with a 1hdgte will have 4:1
75x, 6ox, 47x ect all have 4:1
70x v8 have a ratio of 3:9
I have been through this discussion on lcool a while ago and also when I sold a centre to a fella with a 79 x fte.
Until I'm proven wrong these are the figure I have experienced.
Also on the compliance plate they have different numbers for the diffs.
79x with a 1hdgte will have 4:1
75x, 6ox, 47x ect all have 4:1
70x v8 have a ratio of 3:9
I have been through this discussion on lcool a while ago and also when I sold a centre to a fella with a 79 x fte.
Until I'm proven wrong these are the figure I have experienced.
Also on the compliance plate they have different numbers for the diffs.
Re: 79 series diff ratios
I agree with tobie except for the older series (60 etc)
I have always been told that they are 4.11 ( 37/9 ring/pinion)
James
I have always been told that they are 4.11 ( 37/9 ring/pinion)
James
Who is online
Users browsing this forum: No registered users and 8 guests