Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Air locker help
Moderators: toaddog, Elmo, DUDELUX
Air locker help
Trying to swap a RD132 from a 96 hilux rear diff to a 96 V6 4runner rear dif. The 4runner diff has larger carrier bearings 83mm OD compared to 80mm OD hilux ones. this means the ARB carrier bearing adjuster nut won't fit the 4runner diff. ARB's application chart says the RD132 should fit the 4runner diff. has anyone else came across this problem?
Re: Air locker help
Mmm that's strange as I thought it was the ID of the bearings that changed sizes and the od was the same.
Going from v6 either one should be the same from my experience
Sorry that does not really help you, unless one of the two cars had diffs swapped from something else.
Going from v6 either one should be the same from my experience
Sorry that does not really help you, unless one of the two cars had diffs swapped from something else.
3.0L turbo diesel, 4" lift, bud's front housing, track assasin cv's, air lokker front + Rear, beadlock'd 37 stickies, high steer, 15.5" travel ranchos, high pinion diff and coils on the rear
Re: Air locker help
found an ARB part number for a 85mm adjuster nut 100103. will source one monday hopefully everything else should be ok.
Who is online
Users browsing this forum: No registered users and 19 guests