Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

60 series power window Problem!!!!!

For all things Electrical.

Moderator: -Scott-

Post Reply
Posts: 1
Joined: Wed May 15, 2013 2:17 pm

60 series power window Problem!!!!!

Post by Shifty_Sixty »

Hello I have hj60 with some window problems
Priced new panel @ $200-$250 so there has to be cheaper alternative

Want to replace old rocker switch on door to middle console
Can anyone help?????
Posts: 375
Joined: Mon Mar 03, 2008 4:29 pm
Location: Camden NSW

Re: 60 series power window Problem!!!!!

Post by Canyonero 4x4 »

What is the 'problem' with the power windows?
Are you sure it's the switch? Have you bypassed it?
Is that price from Toyota? Or have you looked at wreckers/ebay?


Most of us can help, but we're still not sure what it is you need help with...
Dave
Posts: 375
Joined: Mon Mar 03, 2008 4:29 pm
Location: Camden NSW

Re: 60 series power window Problem!!!!!

Post by Canyonero 4x4 »

To buy new rocker switches, assuming you want 4 of them at about $30 a pop, there's $120. Add the door lock and window lock switch, there's another $50. Plus the switch housings, $15. You're now at $185. Add some postage into that and you're not far off $200. That's before you start spending hours on end running wires, and the risk of fucking something up. And you'll end up with an ugly hole in the door. If you're confident it's the switch, I'd just replace with another one.
I have no first hand experience with the ebay quality, but if you're concerned look at 2nd hand.
Dave
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Re: 60 series power window Problem!!!!!

Post by chimpboy »

In my experience, the best thing you can do for most electric windows in cars from that era is leave the old switches in place, but wire in relays to run the window motors. Then the switches are just there to trip the relays.

Of course this depends on exactly what's wrong but most commonly it is tired switches combined with long runs of wire that's too light. Usually the switches are still fine to operate the relays but not to operate the window motors.
This is not legal advice.
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest