Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Trimming 5mm off front and rear axles....WTF?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 2808
Joined: Tue Jul 08, 2003 4:51 pm
Location: NORTH of the black stump.......Townsville

Trimming 5mm off front and rear axles....WTF?

Post by MUSS »

So there is a lot of talk on a number of FB pages about trimming 5mm off the spline end of both front and rear axles to prevent rear dowels and studs shearing and front locking hubs exploding...... can anyone elaborate on this and explain how this works?

cheers,
MUSS
:armsup: The Offical Founder of ARMS UP
Jimmy James Beam the III from babinda and mt isa and other places u don't wanna know about :armsup:
www.blackriver4wd.com
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Re: Trimming 5mm off front and rear axles....WTF?

Post by Z()LTAN »

To put it elaborately these people are retarded.
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Posts: 41
Joined: Sun Sep 02, 2012 4:15 pm

Re: Trimming 5mm off front and rear axles....WTF?

Post by Blackened »

Just to elaborate these guys must be nissan owners buying toyotas.
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Re: Trimming 5mm off front and rear axles....WTF?

Post by hulsty »

Re-tards, standard 30 spline axles break before the hubs shear off anyway.
The Silver Bullet - BJ74
Where the actions at Ontrack 4wd Club
http://www.ontrack4wdclub.com/
[url]http://www.cams.com.au/[/url]
Post Reply

Who is online

Users browsing this forum: No registered users and 59 guests