Gday guys I just recently bought an 89 GQ, and I am wanting to chop it into a single cab / space cab, with a separate steel tray. I Have been trying to find info in searches but am not really having any luck finding anything relevant.
Was wondering if there were many guys out there that had done a similar thing themselves. My main worries are what rear cab to use? what to look out for or make sure of for engineering in QLD?.
I am a welder by trade and would be looking at doing it myself in my shed. But I was wondering if anyone knew of anybody around the gold coast ideally or Brisbane that dose conversions, engineering/ compliance plates, or both. Just trying to figure out if its worth the headache of doing it myself or if im better to get it done and engineered by someone, and how much it would hurt my wallet.....
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
GQ ute chop
Re: GQ ute chop
get on to Paul from Kustom kages and engineering mate. he has opened a shop down that way now. he has been doing chops for years.
only the first roll hurts, then its a ride..
Re: GQ ute chop
Agreed, go to Paul. He's now working near South Coast Auto, but still doing chops i believe
Who is online
Users browsing this forum: No registered users and 45 guests