Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Toyota brake system with subaru caliper Q. Rears staying on

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 1791
Joined: Fri Aug 24, 2007 3:02 pm
Location: Kurrajong Heights, NSW

Toyota brake system with subaru caliper Q. Rears staying on

Post by BlueSuzy »

Hello all

I think i have a problem with either my brake master or rear calipers. The system is useable at the moment but it seems the rear brakes are staying on. When parked they smoke/smell alittle.

My car is a Suzuki Sierra LWB.

Running an import 60'booster because of size restraints with steering column through firewall.
80' series master(ebaynew) Meant to be for the disc 80'.
Hilux front vented rotors and calipers up front. Cleaned out and regreased with original seals
Patrol GQ disc rear with Subaru front calipers off a L series wagon. Cleaned out and regreased with original seals, can't find a new seal kit?? Bigger type caliper.
Manual adjusted prop valve for rear

For 80' series, is the spring pressure release? for the rear disc in the booster or master?


Has anyone else had this problem?

Image
Image
I am Tim
Posts: 164
Joined: Thu Sep 13, 2007 5:11 am
Location: nz

Re: Toyota brake system with subaru caliper Q. Rears staying

Post by zukmeista »

Are you sure the master cylinder is to suit disc rear? The ones to suit drum rear have a residual pressure valve to prevent the shoes from returning too far, if this is not removed when converted to disc rear it will cause the calipers to stick on.
Grow some balls.

That is all.
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Re: Toyota brake system with subaru caliper Q. Rears staying

Post by bazzle »

Also ensure the master cyl has a tiny gap to the pedal arm on release to ensure shuttle piston fully back.
Posts: 117
Joined: Tue May 18, 2010 5:41 pm
Location: Brisbane

Re: Toyota brake system with subaru caliper Q. Rears staying

Post by ae86levin »

bazzle wrote:Also ensure the master cyl has a tiny gap to the pedal arm on release to ensure shuttle piston fully back.
I had the same problem when I did the conversion on a Hilux. In my case the problem was exactly what bazzle said - the rod on the transplant booster I used from an 80 series was slightly too long so that the pedal was not allowing the brakes to disengage. I'm not sure why but it seemed to only effect the rears.

Also watch out for your rotors being warped by the heat, mine developed a horrible warp after the overheating. The problem is that when you clamp the handbrake on while they are so hot the rotor cools a different rates causing a warp (at least that is what I read). Many posts on the net say that a rotor can't warp but I have a video of mine with a runout guage showing massive warpage.
Post Reply

Who is online

Users browsing this forum: No registered users and 44 guests