Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Link material

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 46
Joined: Sun Oct 04, 2009 9:54 am
Location: mt isa

Link material

Post by sht50 »

Hey guys just wondering what everyone is using for link material? The weld in bungs I have are 1.5"od. I was trying to chase down some 2"x0.25" wall 1020DOM but no one up here even knows what that is even after explaining it. Any other suggestions?
Top
Posts: 1285
Joined: Thu Jan 15, 2004 8:22 pm
Location: gold coast

Re: Link material

Post by uninformed »

maybe try getting some "euronorm" or "mecaval" hollow bar
Top
Posts: 2183
Joined: Sun Feb 27, 2005 4:15 pm
Location: newy

Contact:
Contact evanstaniland

Re: Link material

Post by evanstaniland »

alloy
www.energizedracing.com
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Top
Posts: 46
Joined: Sun Oct 04, 2009 9:54 am
Location: mt isa

Re: Link material

Post by sht50 »

What type of alloy? And what size is sufficient?
Top
Posts: 2183
Joined: Sun Feb 27, 2005 4:15 pm
Location: newy

Contact:
Contact evanstaniland

Re: Link material

Post by evanstaniland »

7075. Depends on heim size. I run 2" with 1.25" heims and 1.75" with 7/8 heims
www.energizedracing.com
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Top
Posts: 3725
Joined: Wed Jun 30, 2004 1:45 pm
Location: Blue Mountains, or on a rig somewhere in bumf*ck idaho

Re: Link material

Post by rockcrawler31 »

evanstaniland wrote:7075. Depends on heim size. I run 2" with 1.25" heims and 1.75" with 7/8 heims
can you say that again please? i didn't hear you the first two times
http://www.populationparty.org.au/
Top
Posts: 2183
Joined: Sun Feb 27, 2005 4:15 pm
Location: newy

Contact:
Contact evanstaniland

Re: Link material

Post by evanstaniland »

I didn't double post! Stupid internet
www.energizedracing.com
Support from:
Locktup 4x4
Arb Newcastle
Genr8 LED lighting
Yukon Gear & Axle
Overkill Engineering
Ruffstuff Specialties
Top
Posts: 46
Joined: Sun Oct 04, 2009 9:54 am
Location: mt isa

Re: Link material

Post by sht50 »

How about erw pipe 60.8 of with 11.07 wall thickness for lowers ( overkill I know but available and 50x50 shs with 6mm wall for uppers.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 131 guests