Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Well I am building a D100 - Range Rover chassis and a Defender body and I am looking for a contact to shorten the rear tub.
I am lucky enough to have a Defender 110 2 door hardtop rear tub and wish to shorten by 10" - move the bulkhead back 10" and shorten the front end.
I have done this now on a Series 3 tub as a practice
- but as can understand the D110 is a rarer beast, and so want someone to do it professionally - OR even better someone to make up some new sides in ali with the same profile but 10" shorter.
TDI 30D 1987 Rangie 300 TDI Auto
LRD 100 1993 LR Defender 100" (being built)
Don't know where in Sydney you are but the boys at Dulwich Hill Auto Restorations do some of the best work I've seen... most of their jobs win awards.
They also have a guy that works for them from time to time that can make up a new panel from scratch.
Their number 9559 8188.
Ask for Tim.
Message content not approved for consumption by children or easily damaged psyches. If accidentally exposed, flush eyes with cold water and induce vomiting. If irritation persists, sit quietly and watch SBS.
Sorry mate... didn't notice you wanted it done in aluminium......
Message content not approved for consumption by children or easily damaged psyches. If accidentally exposed, flush eyes with cold water and induce vomiting. If irritation persists, sit quietly and watch SBS.
have some faith in yourself!!
th s111 job looks pretty neat, go with that then practice panel beating when finished.
you will save heaps of money in the long run.
david
