If so tell me how its done. C'mon gimme ideas. I must be able to be done.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Body Lift For Defenders
Moderator: Micka
Body Lift For Defenders
Anyone Anyone??
If so tell me how its done. C'mon gimme ideas. I must be able to be done.
If so tell me how its done. C'mon gimme ideas. I must be able to be done.
We are put on this earth for one thing, and one thing only, to die. What you do in the mean time is entirely up to you!
http://www.outerlimits4x4.com/ftopic52067.php
http://www.outerlimits4x4.com/ftopic52067.php
With the bulkhead mounting directly on the chassis and it being so structural you will have problems.
The inner mounts on the chassis can be lengthened easily enough. To lift the other end you would need to remove the chassis outrigger it mounts on and reweld it a couple of inches higher.
Once you've done that you will just need to make up brackets for the other mounts. This will be more complicated than the tubes used on a normal body. The handbrake will be fun as well.
Steve
The inner mounts on the chassis can be lengthened easily enough. To lift the other end you would need to remove the chassis outrigger it mounts on and reweld it a couple of inches higher.
Once you've done that you will just need to make up brackets for the other mounts. This will be more complicated than the tubes used on a normal body. The handbrake will be fun as well.
Steve
Yeah...seems what these blokes said is right:
CUT CUT CUT...put 2" suspension on it, and cut and relocate the flares 2" higher, then you can get 37"s/38"s there easily...make sure to dish out on the drivetrain though!
Nadim
CUT CUT CUT...put 2" suspension on it, and cut and relocate the flares 2" higher, then you can get 37"s/38"s there easily...make sure to dish out on the drivetrain though!
Nadim
LR Disco truggy:
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
42" Iroks, ZF, dual cases & ARBs, 30 splined, Longfielded, OMEs, Optimas, M8274-50s, Rockstomper rope & Bead-L
LR D-90 TD5 ST:
33" BFT AT, tuned, caged, 1/2 top
What mods do recommend to the driveline if I fit 36" + tyres??
Who does it and at what cost?
I know a mob in North Melb that did great work on my DC driveshafts for the hilux but if there are rover specialists who do it I would rather go with them.
Who does it and at what cost?
I know a mob in North Melb that did great work on my DC driveshafts for the hilux but if there are rover specialists who do it I would rather go with them.
We are put on this earth for one thing, and one thing only, to die. What you do in the mean time is entirely up to you!
http://www.outerlimits4x4.com/ftopic52067.php
http://www.outerlimits4x4.com/ftopic52067.php
Who is online
Users browsing this forum: No registered users and 0 guests