Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

where to get QH sealed beams?-found them

For all things Electrical.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

where to get QH sealed beams?-found them

Post by modman »

does anyone know where to get 7" round quartz halogen sealed beams.
ryans in melb used to sell these 5 years ago.
i need some good lights that can survive a good melbourne mud and water dunk that wont let the tadpoles in.
i'm sick of cleaning the water out of the ipf inserts :x :x :x
david
Last edited by modman on Tue Jun 01, 2004 10:36 pm, edited 1 time in total.
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

total 4wd in epping have awesome light inserts for 80 bucks a pair. they are selling heaps of them too.
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

cheers!
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

no good, they are semi sealed beams, much the same as my ipf's :x
anyone else got a clue :roll:
david
Top
Posts: 1949
Joined: Wed Oct 23, 2002 7:44 am
Location: Melbourne, Australia

Post by MKPatrolGuy »

Tried Bursons, Repco, Autobarn etc??
[size=100][url=http://www.vickrawlers.com/]VicKrawlers.com[/url]
[url=http://www.drfwdc.org.au/]Dandenong Ranges 4wd Club[/url][/size]
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

dang. what are they goin on? a submarine?
Top
Posts: 386
Joined: Mon Nov 03, 2003 9:24 pm
Location: Brisbane Southside

Contact:
Contact Leprecaun

Post by Leprecaun »

Is this going to require a periscope or a snorkel :D
Seriously though why don't you raid a zook and get the headlights off that which are sealed beams and run relays to help with the power and just fab some mounts for them.
Top
Posts: 7
Joined: Mon May 03, 2004 7:39 pm
Location: Far West QLD

lights

Post by wizard1963 »

Have you thought of supercheap/autobarn/etc/etcand as stated before repco. If you don't want water in your lights drive faster :oops:
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

i'm spending more time driving through mud puddles.
the ipf inserts keep getting muddy water inside :x even with the rubber boots on.
my dad used to have cheap $30 quartz halogen sealed beams that are literally waterproof :cool:
i can get sealed beams anywhere and have upgraded the wiring including relays and circuitbreakers(fuses suck on lights :roll: )
i do my fair share of night driving as well so find the qh inserts very handy
david
Top
Posts: 7
Joined: Mon May 03, 2004 7:39 pm
Location: Far West QLD

Post by wizard1963 »

I took a set off my patrol and threw em in the bin when I bought my hella H4's go figger eh. but at least the old Qh's are cheap to replace I live in Mt Isa and have seen the sealed beam lights here so you sure as shit should get em in Melbourne TRY NISSAN ASK for original headlamps for an easly GQ you might be supprised. :shock:
Top
Posts: 7
Joined: Mon May 03, 2004 7:39 pm
Location: Far West QLD

thought

Post by wizard1963 »

Try ebay but the american site you might have better luck what sort of wattage are you chacing and I'll look out for you
Top
Posts: 3299
Joined: Fri Nov 08, 2002 8:28 am
Location: Sydney

Post by spazbot »

why not buy a tube of silicon and just seal em up nice and tight
www.overkill4x4.com
ph 94766137
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

qh lights need too breathe and would burn the silicone off.
i'm looking for wattage 55/65 or greater.
have tried hella,narva,phillips. none of them have made qh sealed beams for years. :cry:
david
ps wizard, i thought all qh sealed beams were h4??
Top
Posts: 7
Joined: Mon May 03, 2004 7:39 pm
Location: Far West QLD

lighten up

Post by wizard1963 »

just a thought but might be worth it put a wanted add in your local rag/trading post someone out there might have em in their shed and the'lll surely be cheap :cool:
Top
Posts: 67
Joined: Thu May 13, 2004 6:39 pm
Location: QLD

Contact:
Contact pig75

Post by pig75 »

Don't know if this helps http://www.noelsautoparts.com.au/Wagner.htm or http://www.bosch.com.au/productcatalogue/sat/lights.htm
ISUZU MU's and GEMINI's
[http://pig75.limewebs.com/index.htm]MY SITE[/url]
[color=red]If beef is in beef mince, What is in pet mince?[/color]
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

still no quartz halogen sealed beams there
david
Top
Posts: 1513
Joined: Tue Oct 21, 2003 8:06 pm
Location: North East Melbourne

Post by ORSM45 »

run a breather pipe. :D
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

looks like it might be the go
david
Top
Posts: 386
Joined: Mon Nov 03, 2003 9:24 pm
Location: Brisbane Southside

Contact:
Contact Leprecaun

Post by Leprecaun »

What would happen if say you had your light, ran a hole up the top connected to say a air input so air constantly blowing in, and a pipe down the bottom acting as a breather. Would this force any moisture out of the lights? and would it take out the globes ?
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

i'll look into breathers, it is a lot easier than trying to presurise the insert.
thanks guys
david
Top
Posts: 247
Joined: Sat Oct 26, 2002 7:48 am
Location: Brisbane

Post by zooki »

75 series toyotas have 7inch round sealed QH in them, would have to be heaps in wreckers everywhere
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

wtf??
all the 75's i've looked at and stripped at the wrecking yard are sealed conventional beams. :?:
can anyone else confirm this :?
david
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

finally found some!!
quartz halogen sealed beams 55/75 watt
$38 each.
hansa parts, arden st. nth. melbourne.
thanks guys
Top
Post Reply

Return to “Auto Electrical”

Who is online

Users browsing this forum: No registered users and 0 guests